MBX7E 1/8TH Electric Truggy (E2014)

MBX-7TE

E2104 - MBX7T 1/8 Electric Truggy Kit (off road)

Mugen Racing is proud to introduce the all new MBX7TE 1/8 Electric Truggy. The 7TE is based off the World Champion MBX7 platform, the MBX7T and all their high end technology. The Electric Truggy has its own unique designs with weight distribution and features which really separates it from any other Electric Truggy on the market.

MBX-7TE

DOWN FORCE FEATURES:

The overall look of the 7TE is awesome with the new aero-dynamically designed low cab forward body which fits tight over the front shock tower and molded side guards of the Truggy. The body is designed for the right amount of front down-force to make the Truggy steer hard but not to be too aggressive. The Mugen wing will keep the back of the Truggy hooked up and flying perfect off jumps. The features keep going on...

MBX-7TE

SUSPENSION FEATURES:

The MBX7TE has the same technology as the MBX7T and is equipped with the same long length front and rear suspension arms. The 7TE front suspension is very unique compared to any other Truggy on the market as you have full adjustability of track width with the ultra-smooth pillar ball design; you have maximum camber, caster and roll center adjustments. The rear suspension creates more rear traction and ultra-smooth action through bumps, jumps and another other obstacles that you attack with the 7TE. The rear suspension has fully adjustable anti-squat and toe in with simple bushing changes in the pivot and rear toe in block. The high quality Mugen big bore shocks come stock on the 7TE so you can be confident that you suspension will be hooked up to the surface.

MBX-7TE

DRIVETRAIN FEATURES:

The drive train was worked on to be lighter and more efficient. The front/rear conical gears and spur gear is cut out to reduce rotation mass. Both the bevel and conical diff gears are straight cut and heat treated for maximum smoothness and reliability. The 7TE comes stock with a 46T plastic spur gear and a 14T steel pinion gear. The combo of the 46T plastic spur, 14T steel pinion and the lightweight drive train the 7TE will create massive power and efficiency.

MBX-7TE

RADIO AND TRAY FEATURES:

Mugen equipped the 7TE with the a special battery tray which will accept either 2 - 2 cell LiPo batteries in a staggered mounting position for optimum weight distribution or a standard single 4 cell battery. A new designed aluminum motor mount which is beefed up so you can fun the bigger and faster electric motors without losing gear mesh or without flex which causes motor and motor mount breakages. There is a heavy duty sliding motor mount that is anchored down with 4mm screws for extra strength. They lay out of the battery tray, center diff mount and radio tray and servo box will create awesome steering, great rear traction and flat jumping abilities.

The MBX7TE Truggy will be available in May 2014...

MBX7TE Features:

- Heavy duty aluminum motor mount housing A

- Heavy duty aluminum motor mount B (screws to the electric motor)

- Small composite molded receiver and steering servo tray

- 3mm A7075 hard anodized chassis

- Lightweight steel spur gear

- Lightweight conical gears

- Straight cut conical and ring gears

- Specially designed front and rear lower suspension arm

- Specially designed rear suspension pivot plate and rear toe in block

- 5mm A7075 aluminum lower suspension plates