Ushering in a new era of easy electric cylinder control, the easy ELECylinder is designed for simplicity from start-up to maintenance. Speed / Acceleration settings can be set in just 5 minutes. No time-consuming programming is necessary. You can also operate it with ON / OFF signals, like a solenoid valve. No time-consuming programming is necessary.
Start and end points can be set at any value
Battery-less absolute encoder means no maintenance required
Built-in controller requires no control panel space
Reduces electric bills, the higher the operational frequency, the greater the savings
DataMan® 70 is a compact fixed-mount barcode reader providing the highest read rates for 1-D and 2-D label-based barcodes. With advanced image formation and a small footprint, DataMan 70 is the ideal solution for slow-moving or high speed manufacturing and logistics applications.
DataMan 70 is equipped with industry-leading 1DMax® with Hotbars and IDQuick® barcode reading algorithms that reliably read label-based 1-D and 2-D barcodes with variations in contrast, blur, damage, resolution, quiet zone violations, and perspective distortion.
CTC's EtherCAT Master and Mitsubishi's MR-J4 Servo
Combine ease-of-use and cost/performance
When equipped with a model M3-41 EtherCAT Master module, the CTC model 5300 controller automatically recognizes and configures the MELSERVO-J4. This eliminates one of the most time-consuming aspects of setting up an EtherCAT network, greatly simplifying the process of system configuration.
Through auto-discovery, the system automatically determines what specific devices are on the EtherCAT network and automatically configures the master to talk to them. This eliminates a time-consuming and potentially error-prone step of having to use a configurator to manually set up your network.
Less sensitive to dirt and boost release performance
Piab is introducing a new proprietary two-stage vacuum ejector technology that offers efficiency improvements in terms of air consumption of between 10 and 15 percent compared with traditional single-stage ejectors.
The flap-free design of the new two-stage STX ejector makes it highly robust and able to operate in very dirty and dusty environments. There are no internal flap valves in the ejector onto which dirt and dust can collect. This is, of course, a great advantage for the maintenance of automated vacuum handling systems operating in busy industrial settings.