Enjoy Precisionscreen's February Newsletter
SAND WASHING SOLUTIONS -  MAKING WASHING SIMPLER 

Fines Recovery Pod
SRD180 Dewaterer
SRD240x
SRD240x

With over 30 years designing and manufacturing experience in the Australian market for the Australian Market we have learnt that the highest form of design is "simplicity without compromise" and no range better exemplifies that value than our extensive range of
washing equipment.

Machines are made to order and clients are encouraged to come and inspect their new equipment as it moves through the manufacturing process.  Precisionscreen's extensive range is designed as modular components and we can easily customise to suit the client's needs, no square pegs for your round sandpit.  

Our equipment includes dry or wet screen box stations, bucket wheels, screws, weirs, cyclones, dewatering screens, barrel washers, filters, sumps, tailored solutions you need for your sand washing process. 

The SRD240x has been designed to provide a mobile solution for new and existing sand washing projects.

SRD240x

The road towable chassis allows the plant to be moved via prime mover easily with minimal set-up costs normally associated with sand washing plants.

The SRD240x requires a clean water source supplied to the 3 inch inlet manifold for the washing screen deck and a 10 inch waste water pipe discharging from the machine to a settlement pond. The machine is packed full of features that makes this the perfect tool for testing sand deposits out cost effectively to give you measurable results before investing in a full plant. The SRD240x is fed via additional conveyor with dry material from another source.

The plant has the ability to make up to 3 different sand grades at the same time.

SRD240x Dewaterer

Features:
  • 8x5 two deck rinser screen
  • Wash kit fitted both top and bottom
  • Dual bucket wheel dewaterer with variable speed
  • High frequency dewatering screen
  • Submerged screw with variable speed
  • 44.8m Galvanised weir area
  • 250mm Cyclone with rubber lined pump
  • Cyclone on a swing allowing it to be stockpiled separately
  • Road towable chassis
  • Engine hydraulic powerpack on-board runs all components
  • Single or double discharge points for sand via screw conveyor
SRD240x Sand Washing Plant
SRD240x Sand Washing Plant

PRECISIONSCREEN SRD180 BUCKET WHEEL DEWATERER 
         
The SRD180 Dewaterer is used to collect sand particles from slurry material fed from a wet screening process.

SRD180 sand washing plant

 
The SRD180's primary job is to pick up the heavier particles of sand as they sink to the bottom upon entry to the tank via the feed tubes. The very efficient poly bucket inserts allows water to drain from the sand discharging it at the other side onto a stockpiler. The plant allows for excellent settlement time of the finer particles. The under water screw drags these particles back to the buckets for collection. The organic material floats to the back of the tank with the silty water and is dealt with by a 44.8m (linear) weir that eventually allows effluent water to escape out the 10 inch discharge pipe back to pond.
SRD180 Dewaterer


Features:
  • Galvanised inlet chutes (two off)
  • Ability to make two size Sand fractions
  • Galvanised bucket wheels with poly inserts
  • Submerged screw for fines conveying back to bucket
  • Option of single or twin discharge chute for washed sand
  • Large adjustable Weir 44.8m linear
  • Large dewatering capacity
  • Buckets and screw variable speed with individual control
  • Wheel mounted with tow bar for site movement
  • Galvanised legs for operation mode
  • Option of 10x5 screenbox attached to Dewaterer as one complete unit
Precisionscreen SRD180 Dewaterer
Precisionscreen SRD180 Dewaterer

PRECISIONSCREEN FINES RECOVERY POD (FRP)
             

 Fine sand recovery

Fines Recovery Pod

Fines recovery Pod is used at the end of the sand washing process to help dry (dewater) the sand from a previous stage or concentrate on recovering the fine sand from the waste water before going back to Pond. Fine Sand recovery is achieved via the on-board 250mm Cyclone fed by the rubber lined pump that collects feed material from the base of the tank. The Cylcone then discharges the heavy particle ( ie fine sand) onto the high frequency dewatering screen for draining. The newly recovered sand can then be deposited to the side of the unit (via screw) or out the front of the Pod onto a Stacker. This sand discharge point is optional depending on Pod Configuration.

FRP Fines Recovery Pod

Features:
  • Vibrating dewatering screen
  • 250mm Cyclone with rubber lined pump
  • Cyclone is on a swing that allows fine material to stockpiled separately
  • Cyclone pump and screen driven hydraulically
  • Large weir area for effluent water 44.8m linear
  • Optional discharge point from dewatering screen
  • Designed to work in conjunction with Precisionscreen Sand Washing products
PRECISIONSCREEN BARREL WASHER             

The Precisionscreen Barrel Washer is designed to scrub and clean natural pebble or crushed aggregate.

Barrel Washer


The Barrel Washer circuit can be used in conjunction with a Precisiosncreen feed hopper to form a standalone circuit or be incorporated into an existing plant set-up. Ideal feed size for the Barrel is 50mm minus but it can handle up to 150mm size rock. The feed material then enters the feed box on the Barrel washer where a large volume of water forces the material into the rotating Barrel. The internal lifters help agitate, scrub and clean the rock creating a rock on rock cleaning action, assisted with the injection of fresh water via the internal spray bar that's runs the length of the barrel. Retention time inside the barrel is controlled via the variable speed controller ranging from 1-10 RPM. Material discharges onto to the 2.4m long mesh Trommel for final cleaning and draining of dirty water. The mesh on the outside of the Trommel is cleaned via a spray to help prevent blinding before material is discharged of the chute.

Precisionscreen Barrel Washer
Precisionscreen Barrel Washer


Features:
  • 4x independently hydraulically driven wheels to rotate the barrel
  • 10mm heavy duty Rubber Lining in the barrel with 12 lifters
  • Enclosed barrel length 4m long with 1.5 diameter
  • Heavy duty skid mounted frame
  • 2.4m long rotating trommel at the discharge end to help drain dirty water away
  • Internal spray bar runs the entire length of the barrel adding clean water
  • Spray bar on the outside of the mesh to keep it clean from build up
  • 3 inch connection hoses for both spray bars
  • 10inch barbed discharge pipe for dirty water
COMPLETE SAND WASHING PLANT LAYOUT             
This plant can accept material from any drying screening process delivered via conveyor belt or a Cyclone mounted above the screen.
Can make up to three different sand fractions and waste material of the front of the wash screen. Cyclone in this case needs swung out away from the machine to make separate product (fine brickies loam).
The water in this set-up has to go through two 44.8m (linear) weirs before discharging to settlement pond.

Mobile Sand Washing Plant
Mobile Sand Washing Plant

SECOND HAND MACHINES AVAILABLE FOR SALE

SANDVIK QH440 CONE
Max Feed Size: 215mm
Hours: 3150
$659,000+gst  ($724,900)
SANDVIK UH440i CONE
Max Feed Size: 215mm
Hours: 4050
$535,000+gst  ($588,500)
SANDVIK QA331 SCREEN
Screen: 4267 x1524mm
Hours: 1000
$215,000+gst ($236,500)

SANDVIK QI441 HS IMPACT CRUSHER
Size: 1360x800mm
Hours: 1600
$650,000+gst ($715,000)
SANDVIK QE341 SCALPER
Screen: 4700 x 1450mm
Hours: 360
$350,000+gst ($385,000)
Screen:  6800 x 2000mm
Hours:  3800
$98,000+gst ($107,800)

Do you have second hand equipment to sell? Give us a call today about our equipment marketing services!
MACHINES AVAILABLE FOR HIRE

Precisionscreen offers a wide range of machines available to hire; from track mounted crushers, screens and scalpers we have the right machine to cater for any job.

AVAILABLE NOW:
SANDVIK QJ341 CRUSHER
Jaw Crusher: 1200x750 mm
Year: 2013
Location: QLD
PRECISIONSCREEN SCORPION PUGMILL
Year: 2011
Location: QLD
SANDVIK QA440 SCREEN
Screen Size: 6096x1524mm
Year: 2013
Location: QLD
SANDVIK QA451 SCREEN
Screen Size: 6096x1524mm
Year: 2014
Location: QLD
 SALE | HIRE | PARTS | SERVICE
CONTACT US
Free Call Aus  1800 727 991 | Int +61 (0)7 3271 4155