KeyStone - June Newsletter
I-CLAMPS

i-Clamp Insulation Displacement wire connectors provide a quick and secure method of connecting wires and devices. The i-Clamps easily pierce the wire insulation to make a tamper proof and reliable connection without the need to cut, strip or otherwise secure the wires.  
 
i-Clamps minimize the time and labor of connecting wires. Using i-Clamps replace the use of wire nuts and electrical tape while providing a secure wire splice/connection that is not dependent on the skill level of the installer. Without having to strip or prepare the wires, installation time is dramatically reduced while connection security is enhanced.
 
i-Clamps are made from translucent Polycarbonate which makes these devices durable in shock
and vibration environments as well as provide the ability to visually inspect the connections.
Once secured, the connection is permanent and tamper proof without the need to worry about
wire exposure or nuts and tape falling off over time.

T SERIES - FOR BRANCHING A LINE

  • Use T-Series connectors when you want to branch off of a common wire run.
  • Ideal for wiring several fixtures in parallel (such as lighting). 
  • The main line will remain as one length of wire, eliminating junctions at every fixture.
  • The connector hinges open to allow the wire be run thru the connector, without cutting or stripping the insulation. 
  • Quick and easy connections are made in seconds.  
  • No tape or wire nuts required.   
  • Conductivity is assured for the entire run, since the main line remains uncut.
TWO WIRE, ONE CIRCUIT CONNECTOR 

T SERIES P/N 8380
  • Current Rating: 15 AMP
  • Type: i-Clamp-T-series - used for branching a wire
  • UL Listed: E490623
  • Voltage Rating: 300 VAC
  • Wire Range (In): 16-14 AWG
  • Wire Range (Out): 16 AWG

2 wire, 1 circuit splice

 

Connector hinges open to allow wire run to be tapped without cutting or stripping

 

No need to strip or cut wire prior to splicing.

 

11lbs [5.0Kg] per wire min pull strength.

 

Material: 

  1. Body: Polycarbonate, UL 94V0
  2. Contact / Jumper: Copper Alloy, Nickel plate.

TWO WIRE, ONE CIRCUIT CONNECTOR 

T SERIES P/N 8381
  • Current Rating: 15 Amps
  • Type: i-Clamp-Two Way series - for adding fixtures or components
  • UL Listed: E490623
  • Voltage Rating: 300 VAC
  • Wire Range (In): 12-10 AWG
  • Wire Range (Out): 14-12 AWG

2 wire, 1 circuit splice

 

Connector hinges open to allow wire run to be tapped without cutting or stripping

 

No need to strip or cut wire prior to splicing.

 

17.6 lbs [8.0Kg] per wire min pull strength.

 

Material: 

  1. Body: Polycarbonate, UL 94V0
  2. Contact / Jumper: Copper Alloy, Nickel plate.




TWO WIRE, ONE CIRCUIT CONNECTOR

T SERIES P/N 8382
  • Current Rating: 20 Amps
  • Type: i-Clamp-T-series - used for branching a wire
  • UL Listed: E490623
  • Voltage Rating: 300 VAC
  • Wire Range (In): 12-10 AWG
  • Wire Range (Out): 14-12 AWG

2 wire, 1 circuit splice

 

Connector hinges open to allow wire run to be tapped without cutting or stripping

 

No need to strip or cut wire prior to splicing.

 

17.6 lbs [8.0Kg] per wire min pull strength.

 

Material: 

  1. Body: Polycarbonate, UL 94V0
  2. Contact / Jumper: Copper Alloy, Nickel plate.
TWO WIRE, ONE CIRCUIT CONNECTOR 

T SERIES P/N 8383
    • Current Rating: 5 Amps
  • Type: i-Clamp-T-series - used for branching a wire
    • UL Listed: E490623
  • Voltage Rating: 300 VAC
    • Wire Range (In): 16-14 AWG
  • Wire Range (Out): 22-18 AWG

2 wire, 16-14 AWG  to 22-18 AWG splice

 

Connector hinges open to allow wire run to be tapped without cutting or stripping

 

No need to strip or cut wire prior to splicing.

 

17.6 lbs [8.0Kg] per wire min pull strength

 

Material: 

  1. Body: Polycarbonate, UL 94V0
  2. Contact / Jumper: Copper Alloy, Nickel plate.


MORE ABOUT KEYSTONE ELECTRONICS
For more than seventy years,  Keystone Electronics has been manufacturing precision electronic interconnect components and hardware, supplying quality products at competitive prices to industry, worldwide.

Our full-line Catalog M65 has products that are engineered specifically for use by OEM Designers and Engineers who create and develop state-of-the-art electronic products, instruments and systems.

While our catalog products meet most standard requirements, modifications as well as custom fabrications can be manufactured to meet your special needs. Design and engineering; precision tool and die capabilities; close tolerance  StampingMachining, and  Assembly; computer-based quality control and responsive customer service are all vital in-house resources which constitute our  Custom Manufacturing Division's capabilities.

Keystone's Quality System is  ISO 9001:2015-certified by DNV  GL Certification, Inc. under the ANAB and RvA accreditations. Our quality assurance program is in accordance with these requirements and applies to all standard and custom interconnect components and hardware.

It is  Keystone's quality policy to continuously improve its products to better satisfy the needs of its customers and to deliver quality products, every time and on time. Our  Global Distribution Network is your assurance of quick response, service, and dependability, worldwide.


VIEW OUR FULL LINE CARD



3-26 - NKK
About Us

SMD Inc. Is a Provider Of Electronics And Electrical Components, Services And Logistic Solutions For Commercial,Industrial And Military Manufacturers.We offer a wide variety of products from an authorized supplier base. We provide technical and sales expertise on all product lines and commodities. SMD Inc. is a specialized distributor with a focused product offering.   This has allowed us to be experts in our supplier's product offerings. SMD Inc. offers supply-chain and logistics solutions to a variety of market segments including energy, medical, industrial controls, defense, automotive and transportation services.

Contact Us

Corporate Headquarters
Irvine, CA 92618
Phone: 949-470-7700

Los Angeles Regional Office
Torrance, CA 90502
Phone: 310-379-3642
San Diego Regional Office
San Diego, CA
Phone: 619-851-9209
Northeast Regional Office
Salem, NH 03079
Phone: 603-681-0320
Southeast Regional Office
Atlanta, GA
Phone: 770-503-5844
Southwest Regional Office
El Paso, TX 79906
Phone: 949-470-7700
Midwest Regional Office
Chicago, IL
Phone: 847-293-1881
Florida Regional Office
Deerfield Beach, FL
Phone: 954-428-8840

Sunnyvale Regional office
Sunnyvale, CA 94086
Phone: 408-988-3751
Arizona Regional Office
Mesa, AZ 85210


STAY CONNECTED:
Like us on Facebook Follow us on Twitter View our profile on LinkedIn