| |
|
|
Used Extruders For Sale
Manufacturers Include: Vemag, Bonnot, Sterling & Fitzpatrick
Vemag vacuum extruder, model R500 "Robot 500". All stainless steel construction. Includes 110 liter hopper with 38" diameter opening with attached breaker arm. Unit is a dual screw filler; complete with vacuum pump. Unit is capable of filling up to 5,500 pounds per hour and 450 portions per minute depending on product. Driven by 220/440V, 3/60Hz motor. Complete with "Vemag PC878" digital controls. Very good condition.
|
Vemag vacuum filler, model HP10. All stainless steel construction. Includes approximately 110 liter hopper with 38" diameter opening. Unit is a dual screw filler; complete with vacuum pump. Unit is capable of filling up to 12,500 lbs/hr depending on product. Includes attached tote dumper. Unit complete with VEMAG "Duo-Drive" to conveying elements and feed. Driven by 220/440V, 3/60Hz motor.
|
Bonnot Extruder, all 304 stainless steel contacts. Includes jacketed trough measuring 34" long X 15-1/2" wide X 20" deep. Unit has 4-1/2" diameter X 54" long shaft. Driven by 7.5 HP, 385/76 V, 3000/600 RPM, 3/60Hz motor though gearbox with output ratio of 37.8:1. Includes 12-1/2" diameter discharge. Mounted on mild steel base with casters.
|
Bonnot extruder, 304 stainless steel, jacketed, trough measures 24" x 24" x 32" deep, has 4-1/2" diameter shaft, approximately 15-1/2 diameter x 40" long. Unit is driven by 10 Hp 285/76 volt, 3000/600 rpm 2 speed motor thru gearbox, with gear ratio of 38:1. Unit has 10-1/2" diameter discharge, is mounted on carbon steel base. Unit has de-airing feed chamber. Last used on Masa for corn chips.
|
|
C741813 Extruder, 12 Dia, C/st, 20 HP, Vacuum, Turbo Separator,
S321650 Extruder, 12 Dia., Christian, S/st, Twin Screw, 7-1/2 HP,
S741078 Extruder, 10 Dia, Bonnot, 304 S/st, 10 HP,
Z320055 Extruder, 10 Dia., Fitzpatrick, Malaxator, S/st, 10 X 6.5'
S320050 Extruder, 8 Dia., Enterprise, Meat, 30 HP, 1/16 Dies,
S321690 Extruder, 6 Dia., Fitzpatrick, Malaxator, S/st, 6 X 3.5'
S741087 Extruder, 4-1/2 Dia, Bonnot, 304 S/st, 7.5 HP,
A740570 Extruder, 4-1/2 Dia, Davis Standard, 24:1, 200 HP
A741503 Extruder, 4-1/2 Dia, Sterling, 400 HP, Plastics,
C740516 Extruder, 3 Dia., Starkey, Mdl 851, Pugmill, Cutter
Z324555 Extruder, 2-1/4 Dia., Bonnot, 2-1/4 X 78, S/st, 20 HP,
S739219 Extruder, 2.5 dia, NRM, Mdl 2-5-24.1, 40 HP, Plastics,
S739221 Extruder, Belt Puller, C/st, 1 HP, Right to Left
C736485 Extruder, Mixer, 6, S/st, 10 HP, Pasta
C323075 Extruder, Sterling, 3-1/2, 21:1 L/d, Plastic, 50 HP,
S741408 Extruder, Vemag, Mdl HP10, S/st Hopper, Vacuum,
S741404 Extruder, Vemag, Mdl R500, S/st Hopper, Vacuum, Controls,
S741403 Extruder, Vemag, Mdl R500, S/st Hpper, Vacuum,
OR
|
|
Machinery & Equipment Co.
San Francisco, CA
(415) 467-3400
|
|
|
|
|
|
