Do you have a vintage truck you're not sure if you should restore or not? Check out this article on vintage truck values and let us help you get those oldies running!
TK8335/TK8336 Wheel Bearing and Seal Kits for 1965-1975 GM and 1974-1988 J20 ¾ ton trucks  with Dana 60 full floating rear axles feature premium Timken® bearings and OE quality wheel seals because when it comes to rear wheel bearings and seals, only the best will do to safely support the heavy loads your truck hauls. TK8335 Master Kit with Tools includes 4 Timken® bearings with cups, 2 wheel seals, 2 stock spindle nut lock washers, 2 axle shaft flange gaskets, seal installer, bearing cup installers, & driver handle. TK8336 Kit includes all the same great parts, but no tools. Tools Made in U.S.A. Bearings and seals usually U.S.A. made, but may be imported.

APPLICATIONS:
Chevy and GMC:
1965-1972 C20, C25, C2500, K20, K25, K2500 with Dana 60 Rear Axle
Jeep:
1974-1988 J20
TK4708/TK4779/TK4899 Torque King® Wheel Bearing Kits for Chevy, GMC, Ford, and Jeep applications from 1960-1977.5 with external mount lockout hubs or drive flanges. TK4708 Master Kit with Tools includes 4 Timken ® bearings with cups, 2 wheel seals, and tools. TK4779 Kit includes all the same great parts, but no tools. TK4899 Kit is a Bearings Only kit.

APPLICATIONS:
Chevy and GMC:
1960-1977.5 K20, K25, K2500
Ford:
(Closed Knuckle:)
1961-1975 F-250 Dana 44HD Front Axle
1973-1975 F-250 Crew Cab Dana 60 Front Axle
(Open Knuckle:)
1976-1977.5 F-250 Dana 44 Front Axle
1976-1977.5 F-250 Crew Cab Dana 60 Front Axle
Jeep:
1974-1977.5 J20
TK4744 Torque King® Dana 60 Front Wheel Bearing and Seal Kit   for 1977-1991 Chevy/GMC, 1975-1993 Dodge, and 1978-1997 Ford heavy-duty 3/4 ton and 1 ton 4x4 trucks with open knuckle Dana 50IFS, Dana 60 or Dana 61 front drive axles. Kit includes Timken® Inner and Outer Wheel Bearings with Wheel Bearing Cups plus Dana original equipment replacement Wheel Seals. 
NOTE: This Kit DOES NOT INCLUDE Tools or Hub Small Parts for your 4x4!!!

APPLICATIONS:
Chevy and GMC Dana 60:
1977-1987 Chevy K30, K3500 
1977-1991 GMC K35, K3500
1988-1991 K3500/V3500 1 Ton (square cab models)
Dodge Dana 60, 61:
1975-1993 W-350 1 Ton* 
1989-1993 W-250 all with Cummins Diesel
Ford Dana 50IFS:
1980-1997 F-250 with 4600 lb. front axle
1980-1985-1/2 F-350
Ford Dana 60:
1978-1979 Heavy-Duty F-250, F-350
1985-1/2 to 1997 F-350 
*Some mid 1980's, Dodge Single Rear Wheel W350 models had a Model 44!!!
TK8322 DRW Torque King® Rear Wheel Bearing and Seal Kit for 1972-1993 Dodge Dana Dana 60HD and 70 Dual Rear Wheel Axles   features premium Timken® bearings and original equipment quality wheel seals because when it comes to rear wheel bearings and seals, only the best will do to safely support the heavy loads your truck hauls. Kit includes Timken® Inner and outer wheel bearings/bearing cups, double-lip inner wheel seals, steel axle shaft flange gaskets, and Threadlocker for the axle shaft flange bolts. This Kit fits 1972 to 1993 Dodge 4x2 and 4x4 300, or 350 series trucks with Dual Rear Wheel Dana 70 Rear Drive Axles. Also fits Vans and van based chassis with either Dana 60HD or Dana 70 dual rear wheel rear axles.

APPLICATIONS:
Dodge:
1972-1994 B300, B350, and 1 ton Van Based Chassis with Dana 60HD or Dana 70 Dual Rear Wheel Rear Axles
1972-1993 Dodge D300, W300, D350, W350 Dana 70 Dual Rear Wheel Axles
QU15025 Rear Wheel Bearing and Seal Set for 1974-1979 Wagoneer, Cherokee, and J-10  Dana 44 Semi-Float Rear Axles. QU15025 fits the Dana 44 flanged rear axle shafts on your 1974-1979 Jeep J-Series 4x4. Set includes Rear Wheel Bearing, Bearing Lock Ring, Outer Seal and Inner Seal.

APPLICATIONS:
Jeep:
1974-1979 Wagoneer
1974-1979 Cherokee
1974-1979 J-10
TK8339 Torque King® Parts Only Rear Wheel Bearing and Seal Kit for 1967-1969 Jeep M715 series 1-1/4 ton Military Trucks features premium Timken® bearings and original equipment quality wheel seals. Kit includes Inner and outer Timken® wheel bearings/bearing cups, inner wheel seals, spindle lock washers, axle shaft flange gaskets, and Threadlocker for the axle shaft flange bolts.

APPLICATIONS:
Jeep:
1967-1969 all Dana 70 rear axles in Jeep M715, M725, M726 series 5/4 ton 4x4 military trucks
QU11164 1-3/4 Thread Spindle Hex Nut for Dodge, International, and Jeep Dana 44 Front Axles  is an original equipment spec case hardened spindle nut that fits 1956-1975 International, 1957-1974 Dodge, and 1968-1973 Jeep 4x4 trucks with 1-3/4" spindle threads and external mount wheel hubs. Hex size is 2-1/2". Use 2 per side, 4 per vehicle. Made in U.S.A. Sold individually.

APPLICATIONS:
Dodge:
1957-1968 W100
1957-1974 W200
International:
1956-1963 100, 1100 1/2 ton with 6 bolt, external mount hub with 3-3/4" bolt circle
1956-1975 120, 1200 3/4 ton
1966-1975 IHC Dana 60 Rear Axle
Jeep:
1968-1970 J4000 with 8000 pound GVW including Camper Special
1971-1973 J4800 with 8000 pound GVW including Camper Special
QU10870 New Process NP205 Irregular Shift Link  is a genuine New Process part for most Chevy, Dodge, Ford, GMC, and International New Process NP205 gear drive Transfer Cases with unequal length shift rails. Center hole is made for 7/16" diameter shift rod or bushing. Made in U.S.A.

APPLICATIONS:
Chevy and GMC:*
NP205 Transfer Cases*
Dodge:
NP205 Transfer Cases
Ford:*
NP205 Transfer Cases*
Jeep/IHC:
NP205 Transfer Cases
*Note: Except for Ford cases with S-bent Shift Links, QU10870 fits all the NP205 transfer cases with unequal length shift rails and 7/16" shift rod ends. It is not the correct part for 1985-1991 GM models that use QU30287  link with a 1/2" center hole to accommodate a shift rod bushing.
QU40188 8 Bolt Knuckle Ball Seal Kit for Dana Spicer Front Axles  is genuine original equipment for light 3/4 ton and smaller Dana closed knuckle front axles in 1951-1975 4x4s with Dana Spicer Model 25, Model 27, Model 30, or standard Model 44 front drive axles with the small diameter knuckle ball. Kits include split metal backed ball seal, felt wiper seal, metal backing plates and 8 new serrated, flange head cap screws.  Two kits required to service both sides  of your front axle assembly. Made in U.S.A.

APPLICATIONS:
Chevy and GMC:
Closed Knuckle standard Dana 44:
1960-1969 K10/K15, K20/K25 
Dodge:
Closed Knuckle standard Dana 44:
1957-1971 W100, W200
Ford:
Closed Knuckle Dana 25 :
1942-1945 GPW military
Closed Knuckle standard Dana 44 :
1959-1966 F-100
1959-1975 F-250 with standard Model 44 Front Axle
International:
Closed Knuckle Dana 27, 30, 44 :
1961-1971 Scout
1953-1975 1/2 ton and light 3/4 ton
Jeep 
Closed Knuckle Dana 25, 27, 30, and 44:
1941-1957 Military models MB, M38, M38A1, M170
1945-1971 All civilian Jeeps
1972-1973 Jeep J-Series full size 4x4s
Studebaker:
Closed Knuckle standard Dana 44 :
1957-1964 4x4 Pickups
QU40035 Hub Spring Plate  fits between the  QU40050  hub spring and the outer wheel bearing cup on SUV's, and pickups with Dana Spicer Model 30, Model 44 or GM 10 Bolt front drive axles equipped with internal mount, Spicer factory lock out hubs or full time drive gears. These Spring Plates were used on most of the late 1960's to mid 1980's Chevy, Dodge, Ford, GMC, IHC, and Jeep 4x4s with internal splined front wheel hubs. Made in U.S.A.

APPLICATIONS:
(part will fit these models but may not have been original equipment for all years)
Chevy and GMC :  
1960-1979 K5 Blazer, Jimmy, K10/K15/K1500/V1500 Truck and Suburban
1977.5-1991 K20/K25/K2500/V2500 Truck and Suburban
Dodge:
1969-1974 W100
1980-1993 W150, W250 with Dana 44 axle
Ford:
1959-1987 F100, F150 (Dana 44)
1966-1979 Bronco (Dana 30, Dana 44)
1988-1989 F150, Bronco with Splined Wheel Hub (Dana 44IFS)
1990-1996 F150 and Bronco (Dana 44IFS)
1959-1975 F250 with 3330 Pound Dana 44
1978-1979 F250 (Dana 44) 
1980-1996 F250 (Dana 44IFS)
IHC:
1967-1975 1100 with internal spline wheel hub
Jeep:
1974-1991 Cherokee, Wagoneer
1974-1988 J10
1977.5-1988 J20
QU30293 1960-1966 Rockwell T221 Transfer Case Shim and Gasket Kit  includes a complete gasket set and a large selection of steel shims for adjusting bearing end-play.

APPLICATIONS:
Chevy and GMC:
1960-1969 All Full Size 4x4s with Rockwell T221 Transfer Case
YP KNCLKIT-TOY Knuckle Kit for Both Sides Kit includes Nachi bearings, shims, seals, and wipers.

APPLICATIONS:
Toyota:
1975-1990 FJ-40 Land Cruiser
1979-1985 Hilux Pickup
1981-1990 FJ-60 Land Cruiser
1984-1985 4Runner
Super Duper Whiz-Bang Tool of the Month
QT9308i Multi-Piece Slide Hammer Puller Set with storage case. Includes slide hammer with multiple attachments including 2/3 jaw, internal and external pullers, rear axle puller, locking pliers adapter, puller hook, and dent puller.
Torque King 4x4 | torqueking.com | 406-384-0270| sales@4x4tech.net