(4) 1,300 Gallon Fermentation Tanks, each measures 60" diameter x 96" straight side plus 52" deep cone bottom, with dish top head. Tank includes jacketed sections with full insulation. Bottom head includes 1" diameter center bottom outlet. Top head includes 1" diameter center top inlet and lifting eyes. Includes side bottom 16" x 12" oval manway with cover. Tank is mounted on (4) 4" diameter pipe legs with footpads. Manufactured by Nerb. Previously used in beer processing and in good condition.

400 Gallon 316 Stainless Steel Vacuum Tank, manufactured by Holland, previously used as deaerator system. Single wall construction, complete with Dekker vacuum pump with 5.5 KW, 230/460V motor. Includes RDM Technologies control panel. Features Flotek submersible sump pump. Tank is mounted on 54" x 54" skid.

5,215 Gallon Tank, stainless steel construction, measures approximately 102" diameter x 145" straight side. Vertical orientation with cone top and flat bottom, 3" diameter side bottom discharge, 3" bottom side inlet and bottom side manway with clamped cover; includes UV air filter with lights. No nameplate on unit, very good condition.

18,000 Gallon Tank, 316 stainless steel, manufactured by Precision Stainless, agitated, cone bottom, 150" diameter x 214" straight side, steep cone bottom with dish top, tank is fully insulated. Complete with center top agitation, driven by approx. 7.5 HP motor, leading to stainless steel shaft with (2) 4-blade pitched turbine blades on bottom and center of shaft.

(2) 1,175 JV Northwest Brite Tanks, stainless steel construction, previously used in beer processing, measures 42" diameter x 17-1/2' straight side, dish top and bottom. Tank includes jacket with full insulation. Bottom includes center bottom outlet leading to 1-1/2" diameter side bottom outlet. Top head includes (2) 2" top openings with tri-clamp fittings. Includes side bottom 16" x 12" oval manway with cover and internal spray ball. Tank is mounted on (4) 4" diameter short pipe legs with footpads.

5,000 Gallon Tank, manufactured by Santa Rosa Stainless, agitated, measures 8-1/2' diameter X 12' straight side, cone top with sloped bottom, 2" diameter side bottom outlet. Complete with MixMor model HGV-2 side entering agitator, serial# 36621-2, includes 1-1/2" diameter stainless steel shaft with 3-blade prop, 12" diameter swing, driven by 2 HP motor. Top head includes 2" diameter center top opening and 10" diameter opening with hinged cover. Also includes side bottom 20" x 16" oval manway with cover.

View All Stainless Tanks