Used Material Handling Equipment
Bins, Hoppers, Totes, Conveyors, Elevators, Unloaders & more

Portable Stainless Steel Hoppers, 160 cubic feet volume each. Units measures 5' x 5' x 6' straight side with 45 degree cone bottom. Bins are mounted on 68" portable stand, with 7" x 8" discharge featuring teflon slide gate at 34" off floor. Last used on snack foods and in good condition.




Stainless Steel Belt Conveyor, with rubber belt, 24" wide x 19' long. Driven by 1 HP, 208-230/460 Volt, 3450 RPM, 3/60 Hz, mounted on (4) leg base frame with casters and adjustable height. Currently set up with 33" height.





Hapman Flexible Screw Conveyor, with stainless steel screw and Teflon outer tube, screw measures 2" diameter x 20' long. Hapman serial number X15722 AA. Includes stainless steel 24" x 24" x 24" deep pyramid shaped hopper with grate safety cover. Complete with drive and controller. Previously used to convey product from grist mill to hopper at brewery.





(3) IBC Totes, (Intermediate Bulk Container), 500 liter (132 gallon). Manufactured by L.B. Bohle. 38" diameter X 15.5" straight side with 28" deep cone bottom. Bottom discharge measures 8" diameter and includes manual butterfly discharge valve. Mounted on stainless steel forklift frame. Dished top, features 12.5" and 24" diameter lid openings with clamps plus 2" top opening. Last used in pharmaceutical operation. Excellent condition.

Universal Bucket Elevator, Model U2-800ED "Easy Dump", with 32' high discharge height, rated for 640 BPH, 800 cubic feet per hour capacity. Unit features belt speed of 198 FPM, with 5" bucket spacing, 8" wide belt, plastic buckets measure 7" wide x 4.5" deep. Driven by 2 HP Baldor electric motor, 208-230/460 V, 3-phase, 60 Hz. Elevator frame sections each measure 10" wide x 21" long. Previously ran for 100 hours only and in very good condition.

Z-type Inclined Feed Conveyor, stainless steel construction, with cleated belt. Unit has 2' long horizontal infeed section, 8' long incline section and 3' long discharge section. Belt measures 12" wide, cleats are 9" wide x 3/16" thickness x 3" high, 6" spacing. Conveyor features UHMW plastic side rails for total length to an 8' 7" discharge height. Drive is 1 Hp, 230/460 volts, 1650 RPM, 3-phase, 60 Hz. Ratio 92.82, final output 18 RPM, and is complete with an AC motor speed control input, 460 volts for variable speed control.