Used Equipment Available from
2,400 TPH Lignite Plant
Previously Used for Two Years Only | Located In Mississippi

(6) Gundlach Roll Crushers, 2-Roll, rolls measure 15" diameter x 49" wide with segmented 1/2" product tooth. Single Stage Type, 3000 Series, driven by 40 HP motor. Last used to crush 2" lignite coal to 1/2" at rate of 150 TPH with 80% passing. Previously used with (6) Merrick Weigh Feeders, also available. Used for two years only and in very good condition.

McLanahan Apron Feeder, 96" wide x approximately 48' long belt. Driven by 200 HP motor. Model FD4-96C-40.56-12.0-3S, Size D4, Project 408X563. Manufactured in 2012. Last used to feed roll crusher in 2,400 tons per hour lignite processing operation.

Radial Stacker-Reclaimer, manufactured by Schade Aumund, last used in 100,000 ton capacity storage dome at 2,400 ton per hour. Project number 20.277, serial number K95-SK2210-40,91-A2400-3. Drawings and documentation available.

(6) Williams Pulverizer Roller Mills, model DF-100, 100" diameter, driven by 350 HP motor. Complete with spinner separator driven by 75 HP motor. Previously used to run 1/2 X 0 lignite coal at 22% moisture at rate of 80 TPH, 50% passing, 450-550 micron (30-40 mesh). Currently set up for course grind. Complete mill system, still installed with feed hoppers, duct work, electrical controls and accessories. 





Gundlach Roll Crusher, 4-Roll, driven by 200 HP motor. Rolls are 98" wide. Upper Roll diameter measures 30", RPM of 230, features 10 chisel tooth with 4" grabs, 220 teeth per roll. Lower Roll diameter measures 36", RPM of 390, segmented with 20 chisel tooth, carbide inserts. Rolls are hardfaced, couple mounted. Left Hand type. Rated for capacity of 2,400 tons per hour, last used on lignite with petrified wood and clay components, with bulk density of 45 PCF. Rated for up to 5,000 PSI on coal, 15,000 PSI on petrified wood with 50% moisture. Max lump size of 60". Manufactured in August of 2012. 5000 Series, Serial number 5100D2679.


60" & 48" Conveyors, Also Available:


C743205 Conveyor, Belt, 60 x 385', Covered, Incline, 250 HP
C743204 Conveyor, Belt, 60 x 385', Covered, Incline, 250 HP
C743203 Conveyor, Belt, 60 x 365', Covered, Incline, 350 HP
C743202 Conveyor, Belt, 60 x 365', Covered, Incline, 350 HP
C743206 Conveyor, Belt, 60 x 295', Covered, Incline, 150 HP
C743207 Conveyor, Belt, 48 x 295', Covered, Incline, 125 HP
C743213 Conveyor, Belt, 48 x 520', Covered, Incline, 125 HP
C743208 Conveyor, Belt, 48 x 520', Covered, Incline, 125 HP
C743214 Conveyor, Belt, 48 x 1200', Covered, Incline, 500 HP
C743209 Conveyor, Belt, 48 x 1200', Covered, Incline, 500 HP
C743215 Conveyor, Belt, Tripper, 48 x 370', 125 HP, XP
C743210 Conveyor, Belt, Tripper, 48 x 370', 125 HP, XP





OR