Catalog | New Products | Videos

ANSI/ESD S20.20 Compliance Grounding / Equipotential Bonding Systems

_____ Become compliant with ANSI/ESD S20.20:

Use Grounding / Equipotential Bonding Systems

Ensure ESDS items, personnel and any other conductors that come into contact with ESDS items are at same electrical potential

Select Implementing Process: Equipment Grounding Conductor: < 1 ohm Impedance Auxiliary Ground: < 25 ohms to the Equipment Grounding Conductor Equipotential Bonding: < 1.0 x 109 ohms

Need help?

Ground Cords Connects all static control mats and runners to ground. _ Find out more

Ground Snaps Snaps are used to connect a ground cord to a static mat.  _ Find out more

Multi-Ground Hub Provides grounding points for continuous monitors, worksurface mats, tools, carts and other items. Find out more

_ Take the guesswork out of ESD Control _ __ Receive instant warning if personnel or _ __ worksurface mats are not grounded! ___ Immediately take action and find solution ___ so ESDs are not endangered!  ______ ● Real-time monitoring ______ ● Floor view blueprint ______ ● Calibration record keeping ______ ● Email notifications

Find out more

Review previous ANSI/ESD S20.20 Compliance Steps:

Overview

1. Training

2. Product Qualification

3. Compliance Verification

‌ ‌	926 JR Industrial Drive, Sanford, NC 27332 EAST: (919) 718-0000 | WEST: (909) 627-9634 Email: Service@StaticControl.com | Web: StaticControl.com