Issue 49

May 28, 2026

Time to Read: 5 Minutes


-Hot Take-

A machine sitting on the floor is not "capacity." Capacity is the people, processes, programming, documentation, inspection, setup strategy, and support system behind it.

Joke of the Week

Q: Why did the machinist stare at the scrap bin?

A: He was reflecting on his mistakes.

Ask a CAM Pro

Real shop problems. Answers from people who have been there.

How do I calculate the right speeds and feeds for different materials?


Feeds and speeds aren’t universal. The right numbers depend on the material, the tool, and how much of the cutter is actually engaged. Too aggressive breaks tools, too conservative causes rubbing and work hardening. The goal is consistent chip formation.


Start with surface speed.

Use recommended SFM for the material and tool type, then start mid-range if you have a rigid setup, or low-range if you do not.


Convert SFM to RPM.

RPM = (SFM × 3.82) ÷ Tool Diameter (in inches)

This keeps surface speed consistent across cutter sizes.


Set chip load, then calculate feedrate.

Feedrate = Chip Load × Flutes × RPM

Chip load is the real control knob. Too light and you rub, too heavy and you overload the edge.


Adjust for engagement.

Light radial engagement, under about 30 percent diameter, needs chip thinning compensation, usually a small feed increase. Full-slotting needs more conservative numbers because load spikes fast.


Let the cut confirm the math.

Chips, sound, spindle load, finish, and heat will tell you if you’re close. Smooth cutting, stable load, and consistent chips are good signs. Chatter, dust-like chips, burning, or heavy heat mean something needs to change.


Document what works.

Once you find stable numbers for a tool and material, save them in templates or the tool library so the next programmer starts from proven data.


Bottom line:

Start with manufacturer recommendations, calculate RPM from SFM, calculate feedrate from chip load, then adjust for engagement and real-world cutting conditions.


Have a programming question?


Send it in for the next edition of Ask a CAM Pro!

Weekly Poll

Choose from the answers below.

What’s the first thing people blame?

View the results of last week's poll HERE.

From the Floor

They Crash the Machine - On Purpose!


“A friend of mine teaches CNC, and one of the first things they do with new students is show them a controlled machine crash. Not to scare them, but to take away some of the fear. Mistakes happen in this trade.


I’ve had my share of crashes over the years, and most of them taught me something the hard way. You can try to make everything foolproof, but someone will always find a new way to mess it up.


That’s part of learning CNC: try, mess up, learn, and don’t do it that way again.”


-Machinist

CNC Underground: Afterhours

Michael Finocchiaro, PLM expert and startup advisor, joins CNC Underground: Afterhours to demystify product lifecycle management and the realities of digital transformation in manufacturing. Drawing on decades of experience, he digs into common misconceptions, the true role of AI, and why startups are leading the next wave of shop floor innovation. This episode is essential for anyone struggling with messy data, slow processes, or the hype around new tech.


Key Takeaways:

  • Understand why the promise of a "single source of truth" in PLM is more myth than reality, and what to pursue instead.
  • Hear how startups and smaller solutions are outpacing industry giants when it comes to speed, pricing, and AI adoption.
  • Get practical advice to avoid costly mistakes in PLM implementation and software selection by focusing on real-world data, integration, and core needs.

Video of the Week (Powered by GibbsCAM)

GibbsCAM Tech Tip: How to Use Contact Point for Precise Control Over 5-Axis Toolpaths Learn how to use the Contact Point in the 5-Axis option to give you precise control of where your tool makes contact with the surface of your part, without wasting time calculating the perfect side tilt angle.

CAMedy Central

Industry Intel

Why Most U.S. Manufacturers Still Aren’t Using AI and Automation

Despite strong interest in AI and automation, many manufacturers are still held back by legacy systems, unstructured data, high implementation costs, unclear ROI, and the challenge of scaling beyond pilot projects.


UW-Stout Students Build Portable Toy Tractor Assembly Machine

UW-Stout engineering seniors designed a portable, semi-automated manufacturing cell that makes wooden toy tractors while giving kids a hands-on way to learn about engineering, assembly, and manufacturing.



US Manufacturing Reshoring Boom: What the Data Says One Year After "Liberation Day" Tariffs

IoT Analytics says U.S. manufacturing is showing some positive signs, but the macro data does not yet support the idea of a true reshoring boom, with data centers and power infrastructure currently driving the bigger industrial construction story.

Manufacturing Survey

Manufacturing policy is being shaped now. Shops should have a say.

Tariffs. Supplier risk. Federal policy shifts. The 2026 Reshoring Survey captures how manufacturers are actually responding and what's driving their decisions.


In 10 minutes, you'll be able to see exactly how your strategy compares to peers, and your input shapes data used by policymakers and economic developers across the country.


Take the survey → Get the full results.


Industry Growth (Open Jobs)

A few hot openings across the industry this week:


Lead CNC Swiss & Live Tooling Machinist/Turning - Midwest Automatic Products - Melrose, MN


CNC Machinist (Turning) - Dahlquist Machine - Ham Lake, MN


CNC Machinist - Nolting Manufacturing - Hiawatha, IA


Weekend CNC Machine Operator - Applied Engineering - Yankton, SD


Machinist III - Collins Aerospace - Jamestown, ND


Machinist/Programmer - Wackel's Machine Shop - Crete, NE


CNC Machinist/Programmer - Laciny Bros. - University City, MO


Manufacturing Engineer - Park Aerospace Corporation - Newton, KS

Trade Show & Event Radar

June 22-25

Automate

Chicago, IL

July 21

42nd Annual MPMA Open Golf Classic

Coon Rapids, MN

July 29-30

Advanced Manufacturing Expo

Grand Rapids, MI

Sept 5

Minnesota Manufactured Day - Minnesota State Fair

Falcon Heights, MN

Sept 14-19

IMTS

Chicago, IL

Oct 6-7

Top Shops Conference

Cleveland, OH

Oct 21-23

FABTECH

Las Vegas, NV

Oct 28-29

MD&M Midwest

Minneapolis, MN

Nov 11-13

Titans of CNC Boombastic Show

Flower Mound, TX

Did someone forward you this newsletter?

Subscribe to get your own copy every week.