AMF 6 Across Bun Make-up Line Unit with an Accupan Sheeting, Moulding, and Panning Section



See the line in action below

For more info click here
 
For more info click here

AMF 6 Across Bun Make-up Line Unit with an Accupan Sheeting, Moulding, and Panning Section

(This line became available when the original customer had upgraded to a faster, 8 across, AMF bun line.) 

 

The AMF Model SBD high speed bun divider feeds the right-hand bun rounder which then feeds the zig zag flouring section into the proofer tower, to the overhead proofer section and then into the inline Accupan sheeter/moulder/panner section. The overhead proofer is now configured with (2) 10ft long sections and one [1] 8 ft. long section as shown in the attached photos….and this can be further shortened if so desired. A standard feed sheeter/moulder/panner (SMP) is shown as well, without the hot dog moulding boards included, [which could be offered separately as needed]. The overhead proofer sections are floor-leg supported. High speed bun divider requires approximately 30” for auger removal and cleaning. This clearance extends in the direction away from the proofer tower. Electrical requirements are 460V, 60HZ, 3 PH. A remote mounted, three door, S/S, NEMA 4 electrical enclosure controls the entire line. 

See this line in action before its professional removal from the plant

For more info click here
 
Facebook  Instagram  LinkedIn  YouTube