THE CEMTEK KVB-ENERTEC MODEL 7000 CROSS STACK TDL SYSTEM IS AN IDEAL SOLUTION FOR EMISSIONS MONITORING OF AMMONIA (NH3) 
Your solution for Ammonia monitoring for Regulatory Compliance or Process Monitoring for SCR control.
Contact Gary Cacciatore, CEMTEK TDL Product Specialist to see
which system is right for you

714-904-0767
PRODUCT DESCRIPTION
The Model 7000 Laser Monitor is a continuous monitor designed to measure flue gases for both compliance and process monitoring. The Controller uses a near infrared (NIR) Tunable Diode Laser Absorption Spectrometer System utilizing a single mode “DFB” laser mounted in a thermoelectric cooler for unsurpassed accuracy and performance. Since the Spectral purity of the laser is high and the selected absorption feature is unique, measurements can be made free of interferences from any other gas. The measurements are made in-situ across the stack or duct in either a single or dual pass design depending upon the application. A Windows based software package is available to display the data on either a Host laptop PC or the client’s existing data acquisition system.
FEATURES and BENEFITS
Meets and or exceeds NH3 Regulation requirements including:

  • PPS-001: Preliminary Performance Specifications for Ammonia Continuous Emission Monitors (CEMS)
  • Draft SCAQMD PPS-001
  • TDL complies with calibration requirements as set forth in 40 CFR Part 60, Performance Specification 2 (PS2), and ongoing QA/QC procedures for 40 CFR Part 60, Appendix F, Procedure 1

Key Benefits and Features:

  • TDL (Tunable Diode Laser) technology for unmatched accuracy & reliability
  • High sensitivity ppb to percent level measurements
  • One analyzer can be used for up to 8 measurement points
  • Performance designed Process Monitor
  • Gas sampling/conditioning not required
  • Corrosive/toxic applications
  • Calibration not required
  • Extremely Fast (<1 second) response time
  • Compact and simple to install
  • Operates in high dust/moisture applications
  • Unaffected by stack/duct alignment changes
  • Laser located in controller allowing for simple signal control and diagnostic access
  • Moisture can be added as a second channel
  • Off Stack/Process extractive option
  • Hazardous Area Div I & II Options

Environmental Conditions:

  • Can monitor stack/duct gas temperatures up to 1800oC, 5-95% RH, 25-2000 mbar
  • Stack Mounted Optics Ambient Temperature range from -40 to 55oC
  • Analyzer Controller Ambient Temperature operating range from -10 to +40oC, 5-95% RH, 800 - 1200 mbar


THE CEMTEK DIFFERENCE

With a group of expert staff, whose CEMS experience spans nearly fifty years, we are well positioned to engineer and support CEMS for a wide range of applications and industries.
CEMTEK will design, engineer, construct, deliver and install the best possible system for each individual application utilizing quality materials and proven engineering principles to meet your compliance and maintenance needs.
We will work with you to navigate the maze of federal, state and local compliance regulations while exploring new technologies and emerging markets.
Whether your needs are for daily CEMS maintenance and visits or weekly, monthly, quarterly, or annual maintenance visits, our technicians can handle it all. We provide services throughout the United States and abroad.
 
Contact us today for assistance with all your project needs.
800-400-0200

Santa Ana, California
3041 South Orange Avenue, Santa Ana, CA 92707

Hatfield, Pennsylvania
2849 Sterling Drive, Hatfield, PA 19440

Ocean, New Jersey
1750 Brielle Avenue, Unit B-2, Ocean, NJ 07712

Houston, Texas
5829 West Sam Houston Parkway North Suite #707 Houston, TX 77041
CEMTEK KVB-Enertec | www.cemteks.com