Accurate Project Layout = Better Finished Projects
|
|
|
|
The new JessEm Wood Sabre will make big improvements in your accuracy and consistency when you’re laying out mortise & tenon joints, rabbets, dovetail shoulders, or any other time you need to place a razor fine line parallel to the edge of a board. Click stops every 1/2” with the fine adjust wheel adding another 1/16” per turn, plus micro adjust reads down to an amazing 1/256” (0.004”). Aluminum and stainless steel construction, includes a machined aluminum mounting bracket for wall storage. Made in Canada.
Apply Coupon Code JWS1 during checkout.
|
|
Available in 6”, 12”, 18”, 150mm, and 300mm, Bend Rules allow you to simultaneously mark two surfaces of a board without moving the rule to improve your consistency, and a scale along the end even allows drawing lines parallel to the edge of the work piece. INCRA's patented marking holes perfectly accept fine 0.5mm mechanical pencils for can’t-miss accuracy & repeatability every 1/16th and 32nd (or 1mm for metric rules). Made in USA.
Apply Coupon Code BND5 during checkout.
|
|
|
|
|
Quantities limited!
Starting at $134.95
|
These Precision T-Squares are beautiful, truly a joy to own and use, and they offer accuracy previously not available in tools large enough for big furniture or cabinet projects. In addition to laying out work perpendicular to an edge, drawing lines parallel to an edge has never been easier – there are 1mm pencil holes machined into the center of the beam every 1/16”. All parts are CNC machined anodized aluminum, and the beam's beveled edges feature laser engraved scales with 1/32" graduations. Available in 24" & 32" lengths and include a wall mounting bracket. They're made in the USA, too. |
|
This 3" x 6" rule has two stop bars and a grid that allows plotting points relative to the corner of a board in 1/16" intervals. Micro-fine holes and slots in the stainless steel body accept your standard 0.5mm mechanical pencils, and you can even slide off one of the aluminum stop bars to use it as a T-Rule! Made in USA.
Apply Coupon Code XY15 during checkout.
|
|
|
|
|
Now available in Inches or Metric! With the zero in the middle of the rule and scales running out toward each end, it's easy to find the dead center of your work and place precise layout marks relative to that point. Micro-fine holes and slots in the stainless steel body accept your standard 0.5mm mechanical pencils. This multifunction rule also features a bonus protractor section with guide slots at 45°, 30°, 22.5°, and 5° intervals. Made in USA.
Apply Coupon Code CTR12 checkout.
|
|
Quantities limited!
In stock & starting at $47.95
|
These beautifully machined aluminum rules are far better than the general purpose and construction tools found in most home centers - they’re straighter, stiffer, and heavier. Scales with 1/16" graduations are laser-engraved onto the rule's beveled edges, and there's a finger groove machined down the center for secure handling. Available in 24" and 36" lengths,
Made in USA.
|
|
|
|
|
Micro-fine holes and slots every 0.5 degree in the stainless steel body allow you to quickly and accurately plot angles with the included FREE 0.5mm mechanical pencil. Removing the stop bar also exposes a 6" or 160mm centering rule, making this a handy multipurpose tool. Made in USA.
Apply Coupon Code PTR5 during checkout.
|
|
These mechanical pencils are perfect for the holes and slots on all INCRA Rules, and their fine 0.5mm lead diameter will increase the precision of all your layout work. Simple design, grippy rubber barrel surface, pushbutton lead advance. Accepts all 0.5mm lead refills, and office/art supply stores stock lead refills in a variety of hardness. No coupon needed.
|
|
|
|
|
Quantities limited!
Only $64.95
|
Half rule, half precision straightedge, and a great value overall. The inch scale is machined into the beveled edges of this 2.5" x 24" rule and is accurate to +/-0.005" along its length. The edges are straight and parallel to +/-0.003" - excellent specs for a straightedge in this price range and perfect for basic machine setups and checking wooden project parts. Fitted storage case included. Made in USA.
|
|
A marking knife leaves a line about 10 times narrower than a sharp pencil, giving you more accurate parts for those times when you're eyeballing cuts. The back of the blade is flat to precisely follow the edge of a board or layout tool, and the blade is beveled on both edges to allow a single knife to be used right- or left-handed and scribe lines from either direction. 1.5" blade, 5" hardwood handle.
Apply Coupon Code IGMK during checkout.
|
|
|
|
|
This handy accessory brings INCRA accuracy and repeatability to a wide range of setup and layout jobs around your shop. INCRA's patented incremental racks are molded into each half of the gauge, causing settings to automatically snap to the dead center of the nearest 1/32", plus or minus only a few thousandths of an inch. Works great for setting router bit or saw blade heights, laying out mortise & tenon joints, making fence setups on saws & router tables, and much more. Made in USA.
Apply coupon code NCG2 during checkout.
|
|
|
|
Coupons listed in this promotion may not be combined with other existing offers. Offers in this promotion valid only for orders placed between
July 12th and July 18th, 2022.
|
|
|
|
|
|
|
