| |
|
|
Ball Mills For Sale
Used and Unused | High Capacity & Batch Sizes Available
11.5' diameter X 17' long ball mill, manufactured by KVS (Kennedy Van Saun), includes 1000 HP open winding synchronous motor. Features trommel discharge and feed tank. Refurbished in 2013, which included installation of new oil jacking system, oil lube system for Babbitt bearings, new titanium steel water jet-machined discharge grates, and motor refurbishment. Set of new babbit bearings available. Previously operated as a closed circuit dry mill with grinding capacity of 40 metric tons per hour with output fineness of >80% passing 200 mesh. Motor operating speed of 15.8 RPM charged with approximately 78 tons of 1", 2" and 3" steel balls. Last used at a phosphate processing facility and in good condition.
|
D740107 Mill, Ball, 27' x 46', FL Smidth, 20,500 KW, Wet Grind,
D739645 Mill, Ball, 26' X 40'6, FL Smidth, No Motor, Unused, (2)
C740223 Mill, Ball, 22' X 38', Metso, 10,000 KW, Unused, C740223
D739646 Mill, Ball, 22' X 36'5, Metso, 6,250 HP, Unused, (2)
D740108 Mill, Ball, 21.75' x 43', ANI, 10,000 KW, Double Pinion,
D740109 Mill, Ball, 18' x 24', Allis Chalmers, No motor
C740413 Mill, Ball, 18 X 24, Ceramic Lined, 5 HP
D739657 Mill, Ball, 14' X 23', Kobe Steel, Allis Chalmers, No Motor
D742153 Mill, Ball, 13' X 20'5, Allis Mineral Systems, 1,750 HP,(2)
S738509 Mill, Ball, 13' X 21', Allis Chalmers, 2000 HP, R/L,
D739660 Mill, Ball, 13.5' X 28', Metso, 2,800 HP,
D739612 Mill, Ball, 12' X 40', Aerofall, 2-Compartment, Cement
C741335 Mill, Ball, 12 X 5, Denver, Lab Type
D742154 Mill, Ball, 12'6 X 16', Dominion, 1,250 HP,
D740103 Mill, Ball, 11' x 14.5', Dominion, No motor
D739658 Mill, Ball, 11'6 X 18', Hardinge, 1,250 HP, (2)
D740104 Mill, Ball, 11' x 14', Hardinge-Koppers, No motor
C742220 Mill, Ball, 11.5' X 17', KVS, 1000 HP, Refurbished in 2013
D733555 Mill, Ball, 10' X 18', Allis Chalmers, 800 HP,
D739642 Mill, Ball, 10.5' X 15', Allis Chalmers, 800 HP, (2)
D733556 Mill, Ball, 10' X 10', Kurimoto Iron Works, 370 kW
D733559 Mill, Ball, 9' X 15', Kobe-Allis Chalmers, 600 HP,
D742248 Mill, Ball, 9.6' X 17', Marcy, 700 HP (2)
D739661 Mill, Ball, 9.6' X 19.4', Metso, 1,005 HP,
S484980 Mill, Ball, 8' X 6', Marcy, 250 HP,
C740611 Mill, Ball, 7' x 5 1/2', 100 HP, Skid Mounted, Steel Liners
A741872 Mill, Ball, 7' X 12', KVS, 200 HP,
D739654 Mill, Ball, 6' X 8', Metso, 163 HP, (2)
D741555 Mill, Ball, 4' X 5', Colorado Iron Works, 25 HP,
D741554 Mill, Ball, 3' X 5', Denver, 20 HP, Right Hand,
D740102 Mill, Ball, 3' x 3', Vancouver Engineering Works, 7.5 HP
S739708 Mill, Ball, 2'3 x 3'2, 3 HP, Porcelain, 90 gal, 13 CF
Z501254 Mill, Ball, Batch, 6' X 5', Jkt, Porcelain,
Z485823 Mill, Ball, Batch, 4' X 5', Fiedler, Porcelain,
Z501500 Mill, Ball, Batch, 4' X 5', Patterson, Porcelain,
S738884 Mill, Ball, Batch, 3' x 32, Paul O Abbe, 7.5 HP, C/st
D739650 Mill, Ball, Batch, 3'9 X 4', Paul O Abbe, No Motor,
D741526 Mill, Ball, Tower, Koppers, Mdl. VTM-250, 250 HP,
D741527 Mill, Ball, Tower, Metso, Mdl VTM-3000, 3,000 HP,
D741525 Mill, Ball, Tower, Metso, Mdl VTM-3000-WB, 3,000 HP,
D741528 Mill, Ball, Tower, Metso, Mdl VTM-30-LS, 30 HP,
|
|
Machinery & Equipment Co.
San Francisco, CA
(415) 467-3400
|
|
|
|
|
|
