LEV Electric Valve Series from Banjo 

The LEV Series Electric Valves combine the outstanding performance of Banjo's standard electric valves in a much smaller, lighter package. With a 75% smaller profile and weighing 90% less than standard electric valves, LEVs give you much more placement flexibility in your system. Unlike solenoid valves, these lower amperage valves consume very little power when in the open and closed position . LEVs are available in a number of sizes and configurations to support many different applications and attachments.
Features / Specifications
* Stall current: 0.75 amps  
EPDM seals
* Rotating current draw: less than 0.40 amps. 
TFM seats
* Stationary current draw: less than 0.04 amps.
* Standard 3 wire configuration. 
* Polyethylene ball.  
Integrated mounting slot
Response time: 1/3 sec open to close
12 Volt DC
* 5/16" integrated mounting slot

LEV Series with threaded and manifold flange connections
Threaded sizes available in 3/8" & 1/2". Manifold flange connections available in 1". Manifold versions available in single or assembled banks of 2, 3 and 4 units.
Max Pressure = 200 PSI @ 70 °F.   

LEV Series with   John Guest®  fittings
Used in a variety of chemical and non-chemical applications, 
Push-Lock Valves are a popular choice among top industrial engineers and end-users because push lock valves provide a leak proof connection for linking plastic tubing to soft metals and drastically reduce installation time. 
John Guest ®
push-lock connections are available in 1/4", 3/8" & 1/2" sizes. 
M ax Pressure = 150 PSI @ 70 °F

LEV Series with   John Guest® fittings and spray tip adapters
P recisely control your spray and save on expensive chemicals with a high-quality, high-performance LEV Series electric valve. A vailable in 1/4" & 3/8" that allow the use of spray nozzles connected directly to valve for quick and easy installation. Max Pressure = 150 PSI @ 70 °F.

LEV Retail Packaging
Check out the new, attractive, LEV retail-ready package.