Construction Update

Brattleboro-Putney PS 25(11)

Brattleboro NH PC 25(5)

Brattleboro STP PC 25(6)

DATE: Friday, June 5, 2026

The contractor has added an additional night shift across all evening work zones and will be working overnight Friday night into Saturday morning beginning next week on June 12, 2026.

TRAFFIC IMPACTS:

Vermont Route 9: (Night Work)

Flaggers will control alternating traffic patterns in all intersections and through single-lane closures on Vermont Route 9 between the Interstate 91 Exit 2 interchange and the Edmund Heights intersection in West Brattleboro. Monday night through Saturday morning, work zones will be active from 7 p.m. and 6 a.m. No street-side parking will be available in these areas of VT 9 from 6 p.m. to 6 a.m. Monday night through Saturday morning.

U.S. Route 5: Brattleboro to Putney (Day Work)

A single-lane closure will be in place on U.S. Route 5 for the application of final pavement. This lane closure will lengthen over the course of the day to a maximum distance of 1.5 miles and alternate between north- and south-bound lanes. From 7 a.m. to 4:30 p.m. delays are anticipated in this area.

U.S. Route 5: Brattleboro (Night Work)

A single-lane closure will be in place on U.S. Route 5 from the intersection with Noah's Lane to the Exit 3 roundabout. From 7 p.m. to 6 a.m. Tuesday night through Saturday morning, flaggers will assist traffic through the work zone - directing alternating traffic patterns as needed. Motorcyclists should watch for grooved and uneven surfaces.

U.S. 5 Paving final lift of pavement.

CONSTRUCTION ACTIVITIES:

Vermont Route 9: (Night Work)

Milling of side roads and driveways is finishing up. Crews will continue to adjust drainage and utility structures throughout the project limits as needed. Crews will continue to monitor the decibel levels of this operation.

U.S. Route 5: Brattleboro to Putney (Day Work)

Final pavement is being applied in these locations and this work will continue into next week.

U.S. Route 5: Brattleboro (Night Work)

The contractor is planning to begin milling on U.S. 5 starting on Tuesday night. This work will resume from where they left off at the end of last construction season near the intersection with Noah's Lane and continue to the Exit 3 Roundabout.

To view and share this email as a webpage, please utilize the link below:

View as Webpage

LOCATION:

This contract is a composite of three separate paving projects with detailed locations listed below. It includes all Class 1 limits of Brattleboro which are typically noted by a sign stating "State Highway Ends" and "State Highway Begins". Work to be done on these projects includes coarse milling (grinding off the top layers of pavement) to a depth of 2 inches and paving a ½ inch leveling course and then a 1 ½ inch top course of asphalt. ADA evaluation of sidewalk and pedestrian crossings, sign replacement, guardrail repair and replacement, center line rumble strip location evaluation and installation, drainage work, and other highway improvements are also planned as a part of these projects.

Brattleboro PC25(5)

VT 9: The project begins at Edward Heights intersection and extends approximately 1.7 miles east to the I-91 Exit 2 interchange.

Brattleboro-Putney STP PS25(11)

U.S. 5: The project begins on U.S. 5 in Brattleboro at the “State Highway Begins” sign at the intersection with Vermont Avenue and extends northerly along U.S. 5 for approximately 8.0 miles to just north of the Putney Landing Road intersection in Putney. Work will also take place within the roundabout and from the roundabout east to the New Hampshire state line on VT 9.

Brattleboro PC25(6) - Substantially Complete in 2025

U.S. 5: The project begins at the intersection with Generous Street and extends approximately 1.9 miles north to the Vermont Avenue intersection.

VT 9: The project begins at I-91 Exit 2 interchange and extends approximately 1.0 mile east to the intersection with U.S. 5 at the traffic signal.

VT 30: The project begins at the U.S. 5 and VT 30 interchange and follows VT 30 three tenths of a mile north to approximately the intersection with Cedar Street.

VT 142: The project begins at the Class 1 limit sign just south of the railroad tracks near Riverside Drive and follows VT 142 north to the intersection with U.S. 5 at the traffic signal, skipping over the newly paved portion of VT 142 completed for the Brattleboro-Hinsdale bridge project.

OVERALL PROJECT COMPLETION: Fall 2026

Contact Information:

Name - Bethany Oprendek

Phone - 802.267.4044

Email - bethany@bbo-enterprises.com