|
One of our engineers has decided to do a research project on pervious pavement for their master’s thesis. They identified seven porous asphalt areas in a single municipality and conducted infiltration tests of these porous pavement installations. Six of the seven sites failed the infiltration test. Porous asphalt must have an infiltration rate greater than 20 inches per hour for a system designed for quantity control or greater than 6.4 inches per hour for a system designed for water quality control only. Six areas tested were not even close to satisfying these requirements.
It is obvious that only one of the porous asphalt areas was being maintained. It was installed in 2019. The oldest system tested was built in 2013, and the newest area tested was built in 2020. According to NJDEP’s Stormwater Best Management Practice Manual, “the surface course of a pervious paving system must be vacuum swept, not power swept, at least four times per year. Vacuum sweeping must be followed by either air blowing or high-pressure power washing performed in accordance with the specifications recommended for the particular type of system. All dislodged material must be promptly removed. The first annual maintenance must be performed in the spring. Maintenance must additionally be performed in the autumn, after the fallen leaves are collected and removed.”
It is our belief that many people are simply power sweeping their porous asphalt areas, which pushes the fine materials into the void space of the porous asphalt, ultimately resulting in clogging.
I asked my engineer if they were able to identify companies that can be hired to maintain pervious paving systems. They were only able to find one in New Jersey. Porous Pro LLC is a two-year-old company that uses the top-of-the-line regenerative vacuum truck. We reached out to the owner, Tom Eosso, and he invited us to the site he was currently maintaining about a mile from campus. We jumped at the opportunity. Tom showed us his maintenance process. He measures infiltration rates before he vacuums the site and then measures it afterwards. He will repeatedly vacuum the lot until he deems the infiltration rate acceptable at greater than 60 inches per hour. He admits that sometimes the lots are simply too clogged, and the infiltration rate cannot be restored. This requires the porous asphalt layer to be replaced, a very costly operation that can be avoided if regular maintenance is performed from the time the porous pavement is installed. A lot of people wait several years before they start doing the maintenance. Tom’s experience indicates that it only takes two to four years of no maintenance to completely clog the system, thereby requiring replacement.
Rutgers cannot endorse or recommend any company. We are simply sharing what we have learned over the last few weeks. The real issue is that pervious paving systems are not being maintained in New Jersey. If these systems are not functioning as designed, the required stormwater management is not occurring, resulting in more polluted waterways, more flooding, and loss of groundwater recharge. We need to do a better job of making sure these systems are maintained and functioning properly.
~ Christopher C. Obropta, Ph.D., P.E., Extension Specialist in Water Resources
|