Consistency makes for the Ultimate Factory Floor: Polystyle

STATIC CONTROL FLOORING

PolyStyle by SelecTech: Consistency makes for the Ultimate Factory Floor

For more than 25 years, SelecTech has consistently created superior, sustainable flooring products. And its consistency that makes PolyStyle the ultimate factory floor.

PolyStyle utilizes a three-layer system that goes on evenly and smoothly so there’s no need to apply a conductive finish on the top. With PolyStyle by SelecTech, static control properties remain consistent throughout the drying process. Thus, your new flooring now has superior anti-static properties from the top layer through the bottom.

After the installation, SelecTech will test and certify the flooring for ESD qualities. We back that up with a lifetime guarantee.

PolyStyle comes in a wide variety of colors so you can color specific areas of the floor (e.g., handicapped blue; safety yellow). PolyStyle sustains its ESD qualities with each color. That’s not the case with non-gray epoxies from other companies.

Since PolyStyle is made in the U.S., you will not have the supply issues you will find with other flooring companies. If you order today, you could be installing as soon as next week.

For more information on PolyStyle, visit our website or call 508-583-3200.

PolyStyle

Mini Circuits installation

Speaking of PolyStyle, SelecTech recently completed an installation of PolyStyle for Mini-Circuits at their Long Island facility in Deer Park, New York.

Founded in 1968 by Harvey Kaylie, Mini-Circuits is a global leader in the design, manufacture, and distribution of RF and microwave components and integrated assemblies. Working with electronic components like that required a flooring with ESD qualities.

FMSD installed PolyStyle at the square foot facility over seven days this past September. The project included floor prep as well as the application. At the completion of the installation, SelecTech inspected and certified the flooring.

For more information, call 508-583-3200 or drop us a line.

Electronics Manufacturing and Repair

These divisions of the electronics industry are the backbone of the ESD market. Often, manufacturing volumes are high and production is 24/7. Failures due to ESD events can be devastating. Having a reliable ESD Protected Area (EPA) is critical and often required by the end-users of the products being made.