January 15, 2026

Time to Read: 7 Minutes


-Hot Take-

Shops don’t lose money because jobs are hard; they lose money because no one is allowed to stop the machine when the plan clearly isn’t working.

Joke of the Week

What does CNC machining have in common with group texts?

Everyone saw the problem. No one responded. Now it’s on fire.

Ask a CAM Pro

Q: How can I reduce setup time without sacrificing quality?

Setup time is the hidden tax in every shop. You can have a program that cuts parts in minutes, but if it takes hours to touch off tools, dial in work offsets, and get that first good part, you’re losing your edge. The key is standardization, repeatability, and preparation before the machine stops cutting.


Start with standardized tooling.

Use common tool libraries across machines whenever possible. If you have repeat jobs, keep those tools loaded and labeled. The less you swap tools between setups, the faster you can start cutting. Standard tool numbers also mean fewer edits in your programs and fewer mistakes at the control.


Build setup kits.

Organize each job’s vises, parallels, clamps, soft jaws, and gages in a labeled bin or cart. Include setup sheets and inspection notes. When everything travels together, your setup becomes assembly, not a scavenger hunt.


Use quick-change fixturing.

Invest in zero-point systems, subplates, or modular vise bases that locate repeatably. Once dialed in, you can swap fixtures in minutes without indicating every time. For repeat parts, that’s a massive time saver.


Probe for datums and offsets.

Manual edge-finding eats minutes and invites error. In-machine probing automates it. Use probing cycles to set work offsets, check part orientation, and even verify key features before running the full program. A minute of probing beats scrapping a part.


Pre-stage tools and programs.

While one job is cutting, use that downtime to load the next job’s tools, check coolant, and verify the next NC file. Having everything ready means your changeover happens the moment the spindle stops.


Reduce setups through smarter programming.

Design fixtures and plan toolpaths that let you hit multiple sides in one setup. Use 3+2 positioning or indexers to cut more features per clamp. Every setup you eliminate is free time you never have to win back.


Use setup sheets that actually help.

Include WCS locations, tool lists, jaw positions, torque specs, and any probing routines. Pictures help more than paragraphs. The clearer your documentation, the faster and more repeatable every setup becomes.


Verify once, trust it often.

When a setup proves solid, document it and reuse it. Save offsets, fixture coordinates, and setup parameters as templates so future runs are plug-and-play. Repeatability builds speed without cutting corners.


Bottom line:

Speed doesn’t come from rushing, it comes from removing decisions. Standardize, document, and automate wherever you can, and setup time will shrink while quality stays rock solid.


Have a programming question?


Send it in for the next edition of Ask a CAM Pro!

Weekly Poll

Choose from the answers below.

When things start going wrong on a job, who or what decides what happens next?

Tech Tip

This week’s tech tip shows a smarter way to enter a VoluMill pocket by pre-drilling the optimal start location instead of helixing the full depth, cutting cycle time and protecting the corners of your endmill. You’ll see how to combine a drill and VoluMill process, drive drill depth directly from the pocket bottom, and let Auto Z handle the entry so the tool goes straight in with minimal helix where it actually matters.

From the Floor

There was a job; a punch die made from CPM 10V, wicked stuff. Needed a 30-thou hole, inch-thick, plus a tapered cut. I was teaching two new guys at the same time and broke five drills trying to step the hole. I gave up after too many curses at the machine and realized: I could either finish the part or pass down the know-how. I chose the latter. Sometimes the difference between finishing a job and training a future machinist isn’t worth grinding another drill.


-Veteran Machinist

CAMedy Central

Industry Intel

Video: We're Looking to Equalize China's Manufacturing Advantage - Ford's CEO outlines how F-150 production growth and reshoring efforts aim to counter China’s manufacturing advantage and influence supply chains that matter to precision shops and OEM sourcing.



J&J Adds Two US Manufacturing Plants to Investment Plans - Johnson & Johnson’s announcement of two multibillion-dollar U.S. manufacturing facilities in North Carolina and Pennsylvania underscores how major OEMs are reshoring complex production and could shift regional supply chains and skilled labor demand in precision industries


AI Won't Save Manufacturing. People Will - AI alone won’t fix manufacturing, and that real gains still come from experienced people, smart processes, and shop-floor judgment, cuts straight to how decisions actually get made and executed in real CNC environments.


Industry Growth (Open Jobs)

A few hot openings across the industry this week:



Manufacturing Engineer - Howmet Aerospace - Big Lake, MN



CNC Swiss Machinist (Evening Shift) - Arc Precision - Isanti, MN


Manufacturing Engineer/CNC Programming - Emerson - Marshalltown, IA


CNC Swiss Machinist - First Manufacturing, LLC - Humboldt, SD


CNC Programmer - Hiring Agency - Grand Forks, ND



CNC Programmer - New Age Manufacturing - Plattsmouth, NE


CNC Machinist/Programmer - Gerding Enterprises, Inc. - Dittmer, MO


CNC Machinist 787 Comp Fab - Boeing - Wichita, KS


Want your open role featured? We’ll post it for you: email cncundergroundjobs@gmail.com

Trade Show & Event Radar

Date

Show

Location

Feb 3-5, 2026

MD&M West

Anaheim, CA

Feb 23-25

Midwest Manufacturers Trade Show & Conference

Branson, MO

April 8-9

2MTEC

Albert Lea, MN

April 13-16

Machining Summit on the Summit

Mammoth Lakes, CA

April 13-16

Modex26

Atlanta, GA

April 22-23, 2026

MD&M South

Charlotte, NC

June 22-25

Automate

Chicago, IL

Sept 14-19, 2026

IMTS

Chicago, IL

Did someone forward you this newsletter?

Subscribe to get your own copy every week.