BOTTOM LINE UP FRONT:


  • We closely monitor any increase in fire alarms and ensure that our fire alarm systems are functioning properly.
  • Our fire alarms look for particles in the air that could be smoke; the sensors can't distinguish smoke from steam, hair spray, etc., so student activity can contribute to repeat alarms.

Good Afternoon -  


At the beginning of a semester, we tend to receive messages of concern after an increased number of fire alarms. We appreciate you for sharing these concerns; student safety is always our highest priority and we try to balance that with your ability to rest and feel comfortable in your community. 

 

We wanted to reach out to explain some sensitivities in how our fire alarms work, how we monitor and respond to trends, and to share reminders of how you can help avoid triggering an alarm.

ALARM SYSTEMS


Be assured that our alarms are functioning properly and doing what they should. Any time we have repeated alarms from the same sensor, or any other indicators of system issues, our partners in Facilities and Campus Services check the system and sensors.

 

Our fire alarm systems are set at the lowest sensitivity that they can be per fire code. In other words, we cannot make the systems any less sensitive while remaining compliant with the fire code.


Our team receives a notification every time there is an alarm and we will continue to keep an eye on trends and how we can best respond.


Our community directors meet with residents individually who may unknowingly be the cause of repeat alarms. 


Any misuse or abuse of fire safety devices/systems will be referred to the Office of the Dean of Students.

HOW SENSORS WORK


Our rooms use photo particle sensors, meaning they look for particles in the air that could be smoke. Unfortunately, those sensors can't distinguish smoke from steam, hair spray, etc. which often trigger what students will refer to as false alarms. Triggers for these alarms can include:

  • discharging a lot of propellant in the room (air fresheners, cologne or perfume, body sprays, disinfecting cleaning sprays, etc.) 
  • cooking in the room 
  • propping of bathroom doors when showering allowing for a buildup of steam
  • using appliances that create steam or heat (such as irons or hair dryers) too close to sensors


It is important that you not use appliances that are prohibited, as those can set off fire alarms or create unsafe situations in our community. For a reminder of the appliances that are and are not approved in your room, please see the guidance from the Guide to Community Living.

COMMON FIRE SAFETY VIOLATIONS


Covered Smoke Detectors

  • Smoke alone often doesn't wake you- it can make you sleep through a fire. If a detector is covered, it may further limit your evacuation time.


Open Flames

  • Candles, incense, and similar items producing open flames are not allowed in RL&H facilities. (Candle warmers and similar hot plate items are also prohibited.)


Extension Cords

  • Only use UL-listed surge protectors with an on/off switch.
  • Don't plug cords into other cords, as this can overload circuits.


Sprinkler Violations

  • Removing or tampering with sprinkler heads will result in flooding.
  • Do not hang items from the sprinkler heads.


Propped Doors

  • Fire doors prevent the spread of fire in the event of an emergency to allow a safe exit from the building - Propping allows the flame to spread faster.


Blocked Exits

  • Obstructed exits, such as doors and hallways, can be dangerous during an evacuation.
  • Keep all building exits and corridors clear at all times.
If you ever see or suspect a fire in a residence hall, call 911 immediately. Throughout the coming year, please feel free to reference our fire safety web page for additional information and resources.

Best -

Wesley Todd, MPA
Associate Director of Housing
Office of Residence Life and Housing | Wake Forest University
336-758-5185 | housing@wfu.edu | rl h.wfu.edu
STAY CONNECTED
Facebook  Twitter  Instagram