🇺🇸 Happy 4th of July from WittcoSales!

As we continue our Made-in-the-USA Partner Spotlight Series — and as our nation prepares to celebrate 250 years of American independence — we are proud to shine the light on a company that has been engineering with American pride and precision for over six decades.

From our WittcoSales family to yours — wishing you a safe, joyful, and celebratory 4th of July weekend. 🎆

ECD | Electronic Controls Design, Inc.

60+ Years of Excellence. Still Growing Strong.

Proudly Built in Milwaukie, Oregon 🇺🇸

An American Pioneer Since 1964

Long before "process control" became an industry buzzword, ECD was already solving the problem. Founded in 1964 in Milwaukie, Oregon, Electronic Controls Design has spent more than six decades earning a reputation that spans continents — built entirely on the foundation of American engineering, innovation, and an unwavering commitment to precision.

And then, in 1986, they changed the electronics manufacturing world forever.

🎉 The M.O.L.E.® Turns 40 This Year

Forty years ago, ECD introduced the world's first traveling thermal profiler — the M.O.L.E.® — and nothing in reflow process control has ever been quite the same.

What started as a five-channel breakthrough has evolved through decades of relentless innovation: from the SuperM.O.L.E.™ Gold to the high-channel MEGA series, and now to today's revolutionary M.O.L.E.® EV touchscreen technology — available in 6-, 12-, and 20-channel configurations. At every milestone, the M.O.L.E. has redefined what "deep, precise data capture" means for electronics manufacturers.

40 years. One iconic American product. And it's never been better than it is right now.

★ SPOTLIGHT PRODUCT M.O.L.E.® EV6

An Evolution in Thermal Profiling:

The most advanced touchscreen thermal profiler ECD has ever built

Forget PC downloads and delayed analysis. The M.O.L.E.® EV6 puts everything you need — configuration, measurement, and real-time data analysis — right on the device itself, via a smartphone-style capacitive touchscreen that any operator can master quickly. What makes the EV6 extraordinary:

✅ 6-Channel Precision — deep, simultaneous data capture across your entire reflow process
✅ Live On-Screen Profile & KPI Table — see your thermal profile in real time, right on the profiler
✅ Up to 100 Samples Per Second — speed and accuracy, not a trade-off
✅ Supports Multiple Thermocouple Types — K, T, J, E, N, R, S & B
✅ Measurement Range: -200°C to 1,200°C — handles virtually any thermal process
✅ USB-C Communications & Charging — simple, modern, convenient
✅ High-Capacity LiPo Battery — 6-8 hours runtime, charges in under 4 hours
✅ Auto-Shutdown Over-Temp Protection — built-in robustness for the shop floor
✅ Non-Volatile Profile Memory — your data is always safe
✅ ISO 17025 Calibration Certificate Included — ECD's accredited lab backs every unit
✅ M.O.L.E.® MAP Award-Winning Software — the industry's gold standard for profiling analysis

💡 Ready to Upgrade? Trade In & Trade Up!

Here's a 4th of July gift worth talking about.

WittcoSales is pleased to offer customers the opportunity to trade in any legacy ECD profiler — or any competitive brand thermal profiler — toward the purchase of a brand new M.O.L.E.® EV6.

If you're still relying on an older profiler that requires a PC connection for every download and analysis session, you're leaving process control capability on the table. The EV6 gives you everything your current profiler can't — live touchscreen data, real-time profile visibility, and dramatically reduced operator training requirements.

📧 toddwittmer@wittcosales.com | 818-970-5771

The Complete M.O.L.E.® EV Family

Whatever your channel count requirement, ECD has you covered:

M.O.L.E.® EV6 — 6 channels | The shop floor standard. Fast. Precise. Touchscreen-ready.

M.O.L.E.® EV12 — 12 channels | For complex boards requiring simultaneous multi-point monitoring.

M.O.L.E.® EV20 — 20 channels | Maximum data capture for the most demanding profiling applications.

V-M.O.L.E.™ 2 — 4 channels | An affordable, proven entry point for operations adding capacity or a second line.

All M.O.L.E. EV profilers share the same MAP software platform and integrate seamlessly with ECD's full RIDER™ machine quality management suite.

Click above to access full product Catalog

Know Your Machine — The RIDER™ Suite

A great profile is only half the equation. Your machines need to be verified and monitored too — and ECD's RIDER family makes that easy, scalable, and repeatable.

WaveRIDER® NL 2 | Know the Past. Predict the Future.

Wave soldering is one of the most challenging processes to dial in and maintain. The WaveRIDER® NL 2 takes the guesswork completely out of it.

This intelligent process pallet travels through your wave solder machine alongside your production — measuring preheat temperatures, conveyor speed, wave height, contact time, parallelism, and flux deposition all in a single run. Available in 9", 12", 15", and 18" widths (plus custom), it fits virtually any wave solder system on your floor.

What it captures: Dwell time, contact length, immersion depth, parallelism, conveyor speed verification, preheat max temp, Delta T at wave, and flux uniformity — everything you need to verify machine readiness and catch drift before it becomes a defect.

[DOWNLOAD THE WAVERIDER NL 2 DATASHEET]

SelectiveRIDER® | Process Precision for Selective Solder Repeatability

Selective soldering is inherently more complex than wave — and the SelectiveRIDER® is purpose-built to master it. This measurement pallet captures fountain height, fountain X/Y accuracy, fountain diameter, solder temperature, max preheat, Delta T at contact, flux penetration, and fluxer X/Y accuracy in a single, structured test run.

Paired with the M.O.L.E.® EV profiler and MAP software's dedicated SPC environment, the SelectiveRIDER gives you the documentation and data to prove — and continuously improve — your selective process.

[DOWNLOAD THE SELECTIVERIDER DATASHEET]

OvenRIDER® NL 2+ | Reflow Oven Machine Quality Management

Completing the RIDER trifecta, the OvenRIDER® NL 2+ verifies that your reflow oven is performing to the specifications required by your board profiles — not just today, but consistently over time. Because a great recipe means nothing if the machine delivering it has drifted out of spec.

NEW PRODUCT: M-VP™ Sealed Barrier | Now Every Soldering Process Is Covered

Vapor phase soldering is renowned for delivering exceptional results on high-complexity, high-thermal-mass PCB assemblies — particularly in aerospace and defense applications where board density and reliability requirements leave zero margin for error. The challenge has always been that vapor phase environments are notoriously difficult to profile. Until now.

ECD's M-VP™ Sealed Barrier completes the total solder process profiling portfolio — meaning your single M.O.L.E.® EV6 now covers reflow, wave, selective, AND vapor phase soldering. Four soldering processes. One profiler. Zero compromise.

M-VP™ Key Features:

✅ Bluetooth® Enabled — real-time process oversight without leaving the machine
✅ Survives up to 260°C — built for the harshest vapor phase environments
✅ Water-Tight Sealed Design — fully contaminant-resistant construction
✅ Easy Open/Close Clips — no screws, fast setup, operator-friendly
✅ Compatible with Batch & Inline Systems — with or without vacuum
✅ No Degradation Under Vacuum — rugged enough for the most demanding processes

If your operation runs vapor phase and you're not profiling it with confidence — this is the solution you've been waiting for.

Learn More @https://ecd.com/product/m-vp-sealed-barrier/

🎆 Light Up Your Factory Floor This 4th of July

While the fireworks light up the sky this weekend, SmartDRY™ is lighting up shop floors across the country — Green means go. Yellow means working. Red means pay attention. Intelligent storage that literally tells you it's doing its job.

🇺🇸 American-Made. Intelligently Designed. Glowing Green on Factory Floors Nationwide.

Meet the dry storage cabinet that thinks for itself — so your operators don't have to guess. Because on the floor of an American manufacturer, every component counts, every minute matters, and your storage should be working as hard as you are.

SmartDRY™ | Intelligent Dry Storage

Protect Your Components. Protect Your Yield.

Moisture-sensitive components left improperly stored are a silent production killer — causing soldering defects, delamination, and field failures that are difficult to trace back to their source.

The ECD SmartDRY™ line eliminates that risk entirely, with a level of intelligence and user-friendliness that traditionally only came at a much higher price point.

What makes SmartDRY different:

⚡ Sub-3-Minute Recovery Time — access your components up to 10-12 times per hour without compromising humidity control. That's more than twice the access rate of competitive cabinets.

🟢 Intelligent Glow Lighting — a glance tells you everything. Green = compliant, Yellow = working, Red = alert. No guessing, no checking screens.

📡 Industry 4.0 / Network Capable — monitor one or many cabinets from any internet-connected device, 24/7. Full SmartDRY™ network dashboard included.

🔥 SmartBAKE™ Option (SD-10SB) — automatically establishes J-STD-033 compliant bake times based on MSL level, component thickness, and floor life exposure. Storage and bake-out in one compact footprint.

🛡️ Fully ESD Safe — meets ESD20.20/IEC 61340-5-1. Anti-static surfaces, wrist strap jacks, earth ground point, and drag chain included.

🏭 Made in the USA 🇺🇸

The SmartDRY Product Line — A Size for Every Operation

SD-10 | 10 cu ft | 2 Doors | 45"H x 20"W x 30"D The ideal compact solution for smaller operations or targeted storage needs.

SD-10SB | 10 cu ft | 2 Doors + SmartBAKE™ | Same footprint Storage and J-STD bake-out in one unit. The smartest value in dry storage.

SD-30 / SD-30XD | 30 cu ft | 6 Doors or 2 XD Doors | 70"H x 40"W x 30"D Mid-volume operations with full-scale component storage. XD model features tall doors for feeder tray access.

SD-48F / SD-48FXD | 48 cu ft | 6 Doors or 2 XD Doors | 70"H x 40"W x 47"D Maximum capacity for high-volume manufacturing. Deep footprint accommodates feeders directly.

All models include built-in network capability, TFT LCD display, reel rack and shelf accessory options, light alarm tower option, and a 2-year ECD warranty.

Click Here for Full SmartDry Storage Catalog

OvenSENTINEL®

Your Reflow Oven. Watched. 24/7.

Profiling tells you where your process was. The OvenSENTINEL® tells you where it is — right now, every board, every run, all day long.

This award-winning continuous monitoring system sets a new standard in reflow process oversight, delivering precise PASS/FAIL results at the board level, automatic SPC charting, out-of-spec alarms, and full traceability — with a completely customizable dashboard that supports multiple lanes, ovens, and even multiple factories.

Think of it as your most diligent process engineer — one who never takes a break, never misses a board, and alerts you the moment something drifts out of spec.

👁️ 24/7 Continuous Reflow Monitoring — every board, every cycle, always on
📋 Full Traceability — patented TrueProfile™ technology with local and remote database support
🏭 Industry 4.0 Ready — SQL database with full integration, reporting, and deep analytics
🔔 Programmable Alerts — instant notification the moment your process moves out of spec
📡 Multi-Oven, Multi-Lane, Multi-Factory — one system scales across your entire operation

Your M.O.L.E.® EV profiles the process. OvenSENTINEL guards it around the clock. Together, they're the most complete reflow process control solution in the industry.

[LEARN MORE ABOUT OVENSENTINEL] → ecd.com/products-solutions/continuous-monitoring/ovensentinel/

62 Years of American Engineering.

40 Years of M.O.L.E. Innovation.

ECD doesn't just make instruments — they make the standard. From their ISO 17025 accredited calibration lab to their no-cost online training library, ECD invests in their customers the same way they invest in their products: completely, and for the long haul.

WittcoSales is proud to represent ECD across Southern California — bringing world-class process control and intelligent dry storage to the aerospace, defense, and medical electronics manufacturers who demand nothing less.

Ready to evaluate ECD for your facility? Whether it's a trade-in quote on your legacy profiler, a SmartDRY demo, or a process control consultation — let's connect.

[SCHEDULE A CALL OR FACILITY VISIT]

📧 toddwittmer@wittcosales.com | 818-970-5771 🌐 www.ecd.com |