HAPPY THANKSGIVING!
  Sun Automation will be closed on November 28th & 29th
in observance of the Thanksgiving holiday
IAI logo
ELECylinder Expands Product Offering
Simplifying switching from air to electric actuators
New type ELECYLINDER® electric actuators have been added to the series: small type, high rigidity type, splash-proof and side-mounted motor .

The easy ELECylinder is designed for simplicity from start-up to maintenance. Speed / Acceleration settings can be set in just 5 minutes. No time-consuming programming is necessary. You can also operate it with ON / OFF signals, like a solenoid valve. No time-consuming programming is necessary.

  • Start and end points can be set at any value
  • Battery-less absolute encoder means no maintenance required
  • Built-in controller requires no control panel space
  • Reduces electric bills, the higher the operational frequency, the greater the savings


IO-Link Signal Towers
Installs and configures seamlessly through IO-Link interface
PATLITE’s LR6-IL IO-Link signal tower  visualizes sensor information. Corresponding to the worldwide standardized IO-Link technology, this signal tower enables you to communicate with sensors and actuators. 
 
The M12 connector makes installing and replacing easy. The visual information is customizable by choosing up to 5 LEDs in colored calottes or one multicolor LED. With a protection rating of IP65, the LR6-IL is suitable for use in areas with splash water and dust.
 
The LR6-IL is also compatible with PATLITE’s WD system, which enables wireless data transmission. The Wireless Data Acquisition System is a cost-effective, IIoT-enabled add-on which allows signal towers to wirelessly transmit equipment status changes to a host PC for real-time monitoring and data analysis.

ABB Optical Safety Devices
Light curtains - light grids - single beam  
ABB’s broad range of  optical safety devices  includes light curtains, light grids and single beam. Some are basic for the simple applications while other offer more advanced functions such as muting and blanking for the more demanding applications.
 
  • Light Curtains for finger and hand detection
  • Light Grid for body detection
  • Simple Light Beam for body detection

Balluff logo
Bi-Directional Inductive Coupler with IO-Link
Non-contact data and power transmission
Inductive coupler systems are now indispensable in many applications. With their non-contact transmission of data and power, they have replaced the once popular plug-in contacts.

The  new BIC Q40 inductive coupler delivers power up to 1.7 A for an output up to 40 W of power – that is three times that of common couplers on the market. Data transmission between the IO-Link device and IO-Link master is transparent, with no configuration of the IO-Link coupler necessary. Bi-directional communication means you can control actuators and valve terminals at the same time while also collecting signals.

Keep up with the latest Automation Technologies and Company news by following Sun Automation on LinkedIn.

Sun Automation | 3135 N. Delaware St. | Suite #3 | Chandler, AZ 85225

Phone: 480-929-0464  email: sales@sunautomationinc.com