Hoglund Bus Co. August SBF

August 2018 School Bus Flyer MN

Monticello:

116 E. Oakwood Drive, PO Box 249

Monticello, MN 55362

Main: 763.295.5119

Parts: 763.295.5103

Service: 763.271.2999

Office Hours: Mon - Fri, 7:30am - 5pm

Parts & Service: Mon - Fri, 7am - 11:30pm

Bloomington:

9545 Penn Avenue S.

Bloomington, MN 55431

Main: 612.999.9505

Parts: 612.999.9502

Service: 612.999.9501

Hours: Mon - Fri, 7am - 5pm

BACK TO SCHOOL CLEARENCE!

IMMEDIATE DELIVERY AVAILABLE

SALES TEAM

Randy Johnson

N. MN Sales

C: 612.850.5839

randyjohnson@hoglundbus.com

Doug Erdmann

Metro MN Sales

C: 612.756.3335

dougerdmann@hoglundbus.com

Kevin Schmidt

S. MN Sales

C: 612.819.6017

kevinschmidt@hoglundbus.com

Chris Sexton

Used Inventory Manager

D: 763.271.2974

chris.sexton@hoglundbus.com

Brian Watley

Sales Manager

D: 763.271.8750

C: 612.940.3477

brian.watley@hoglundbus.com

TRADE SHOWS

Hoglund Bus Annual Open House

Tuesday, September 25th, 2018 - HBC Bloomington Location

NAPT Summit

10/27 - 10/30, 2018 - Kansas City, MO

“HOGLUND EXCLUSIVE” EXTENDED SERVICE CONTRACT

Hoglund Bus is offering an exclusive extended confidence service program. Eligible to Hoglund Bus customers directly through Hoglund on specs listed below. Offer expires July 31st, 2018

SERVICE INCLUDES*:

Pre-DOT Inspection
6 month cross fluid contamination check
6 month pre-DOT inspection

*Must be brought to a Hoglund Bus location

OEM PARTS:

EXAMPLES OF PARTS COVERED*:

Turbo Injectors
High pressure system EGR cooler
Lubrication system

*Contact Hoglund for a list of all covered parts

Program Details

• Upon registration of these contracts, any existing engine warranty will expire.

• Contract starts at date of delivery to end-user. Example: End-user receives full 12-month coverage from the date unit is received.

• Clean Health Report visible in Service Portal, free from active engine fault codes and/or open recall’s/AFC’s.

• DOT Inspection with recommended repairs and cost/estimate.

IC CE SERIES WALK AROUND

UNDER THE HOOD:

See around entire motor making it easier to perform repairs and pre trip inspections
No locking bar needed to keep hood up – no slam design
No tool required for replacing the headlights or air cleaner
Premium hoses and Constant torque clamps - standard

EXTERIOR:

16 gauge side sheets – staggered rivet pattern
1 piece rub rails with steel formed ends – fully sealed at top
3 rub rails at rear of bus for added protection
No external hinges
Updated passenger windows
Flat rear door – hinges at top and bottom – greese-able
Manual reset circuits – standard
Full thermo windows in entrance door – standard
Rubber mud flaps – standard
Full sound abatement package - standard

UNDER THE BUS:

Chemguard – metal treatment applied before undercoating
Steel fuel cage – no matter the fuel
10 cross members standard for IC (Blue Bird has 8 and Thomas has 7)
Updated hydraulic brakes
Eaton transmission (Cummins) Alison transmission (PSI) - 7 year warranty included

INSIDE THE BUS:

Switch placement forward of driver
Step well: Pebble tread with flex coating inside and out. Not built like a spiral staircase – steps are even height and width
Child check system – not aftermarket
Light check feature
Premium drivers chair
Students seats
Seat belt ready – upgradable anytime to 2 point, 3 point and child restraint
Modesty panels left and right – standard
Full vinyl floor – not rubber
Clipboard storage and cup holder - standard
Front bulkhead storage- standard

PARTS

Our Parts Department carries an extensive inventory of “All Makes” products and can supply everything needed to keep your vehicles running smoothly. We offer daily delivery to local and metro areas in Minnesota. Our goal is to make ordering parts as easy as possible!

Jim Lanz

C: 763.213.3531

jimlanz@hoglundbus.com

Greg Weitzel

C: 612.812.9421

gregweitzel@hoglundbus.com

Mick Maher

C: 612.756.0990

mick.maher@hoglundbus.com

PARTS SPECIALS - 763.295.5103

COVERALLs®

Universal design fits all makes

For sizes 27" - 34" (measuring top of cushion to top of back)

Color: Black/Black

P/N: S181704XN1161

$44.29 ea.

Color: Blue/Black

P/N: S181704XN1162

$44.29 ea.

Color: Gray/Black

P/N: S181704XN1165

$44.29 ea.

ALLISON SPIN ON FILTER

P/N: 29539579

$7.82 ea.

ALLISON HIGH CAPACITY FILTER

P/N: 29558329

$50.80

Fleetrite Brake Parts Cleaner

14 oz. can, non-chlorinated

P/N: FLTANCBC14

$2.40 per can

Vinyl Tear Adhesive

P/N: VLP

$15.52 per can

STOP ARM MOTOR

P/N: 5172K

$106.60

SEAT TAPE - GRAY

P/N: STGY

$35.95 per roll

SERVICE

Our Service Department specializes in the repair of medium duty trucks, school buses and commercial buses. We are an authorized Allison, ArbocSV, BraunAbility, Carrier, Collins Bus, Champion Bus, Cummins Engine, IC Bus, International Truck, Glaval Bus, Ricon Lifts and TurtleTop service center. Our technicians are factory trained, ASE Certified, Master Certified and Diamond Certified in order to assist with all repairs and maintenance of your fleet. Our technicians are required to continue with ongoing classes and training.

Tech Specialist, Doug Yager

Doug Yager has been working with Hoglund Bus Company since 2007 and is our Diamond Certified Tech Specialist. Since 1978 Doug has been involved with the repair of fleets and has continued ongoing training to stay up to date with the ever changing industry and diagnostics of Navistar products.

D: 763.271.2982 E: service@hoglundbus.com

Mobile Service

Hoglund Bus Co. offers mobile service throughout Minnesota. If you can't make it to us, we'll come to you! To schedule your mobile service appointment, contact

Tom Paulson.

D: 763.271.2962 E: mobileadvisor@hoglundbus.com

Service Spotlight

Title: Bus Passenger Window Troubleshooting

Applies To: Bus windows built after 4/17/17

Description: Emergency Exit windows - Handle is hard to open and close. May feel like its binding or operating irregulary.

SERVICE PARTS INFORMATION:

WD-40® Specialist® DIRT & DUST RESISTANT DRY LUBE PTFE SPRAY or an equivalent PTFE dry lubricant can be used.

Note: Any lubricant that contains acetone, butane, or propane should NOT be used as it degrades the polycarbonate window material.

DIAGNOSTIC STEPS:

Is the handle (see figure 1) on the emergency exit window harder than normal to operate? May feel like it is binding or operating irregularly. Cold weather may also impact ability to open.

If yes, apply dry lubricant as illustrated in repair steps below.

REPAIR STEPS:

Open Window
Slide retainer tabs down
Apply lubricant in the area shown by the arrow in Figure 2, for both the upper and lower retainer tabs.
Move retainer tabs up and down as shown below, to allow lubricant to enter mechanism
Apply lubricant to area shown below in Figure 3, the cover does not have to be removed.
Move handle catch up and down, to allow lubricant to enter mechanism
Close window
Wait 30 seconds after closing window and operate window normally
If an excess of lubricant is present, it can be cleaned by using a clean rag that is moistened with soapy water (dilute a tea spoon of Dawn dishwater soap into a gallon of water). Wipe excess away and then rewipe with a dry clean rag. DO NOT wipe inside or around switch area (figure 3 item 1).

Quick Start Guide for OnCommand Link

Initial Setup

Before you start:

• Personal Device Setup: Have a sufficient battery on your personal device to monitor the flashing process.

• 25+ Minutes: Allow for at least 25 minutes without interruptions to complete the vehicle programming process.

• Level, Safe Location: Ensure that the vehicle is level and parked in a safe location for the entire duration of the update process.

• 12.5 to 15.5 Volts: Ensure the vehicle has sufficient battery power while the vehicle programming is in process.

• Parking Brake: Set the parking brake throughout the vehicle programming process.

Step 1: Plug in OnCommand® Link to Vehicle

1. KEY ON/ENGINE OFF

2. Plug OnCommand® Link into the vehicle 9-pin diagnostic port.

3. Confirm green PWR light is ON.

4. WAIT for about 4 minutes for device to boot up and listen for 2 beeps.

5. Confirm the amber APP light is ON.

Step 2: Connect Personal Device to OnCommand® Link

Have the sticker with the SSID and password available for the following:

1. Open the network settings on your personal device.

2. Select the network name that contains the last 8 digits of the SSID provided or last 9 of VIN.

3. Enter the password provided.

Step 3: Connect OnCommand® Link to Internet

1. Open a web browser.

2. Enter: http://192.168.100.1 to open the OnCommand® Link web app.

3. Go to: MENU>Network Settings; select your Wi-Fi network. If prompted, log into your network.

4. Click Save. WAIT for the settings to take effect.

Note: If connection is lost, between the personal device and the link, repeat Step 2: Connect Personal Device to OnCommand® Link.

Step 4: Over-the-Air Programming

1. Connect using Step 2: Connect Personal Device to OnCommand® Link section.

2. For Cummins Engines, perform ‘Step 4A: Update Cummins Engines’.

3. In the Available Update screen, click Update Calibration to initiate software update.

4. Read the pop-up warning window and click Accept.

5. Wait for the Engine Calibration Up-to-Date message to confirm successful update.

Step 4A: Update Cummins Engines

Note: The update process is divided into four phases. Do not disconnect the OnCommand® Link from the vehicle during this process.

1. Perform Step 3: Connect OnCommand® Link to internet, to check for updates.

2. If you see a message Engine Calibration up-to-date, there is no update available.

3. Otherwise, the OnCommand® Link application page will indicate the update process and provide instructions.

Hoglund Bus Co. | 800.866.3105 | 763.295.4992 | www.hoglundbus.com