ANSI/ESD S202.20-2021
7.3 Product Qualification Plan
“A Product Qualification Plan shall be established to ensure that the ESD control items that have
been selected meet the requirements in the plan. The test methods and required limits are
located in the product qualification columns in Tables 2 and 3. Product qualification is normally
conducted during the initial selection of ESD control items. Any of the following methods can be
used: product specification review, independent laboratory evaluation or internal laboratory
evaluation. For ESD control items that were installed by the Organization before the adoption of
this standard, on-going compliance verification records can be used as evidence of product
qualification.”
| 
