Flour Milling Equipment 

*New Items Added to Inventory*

Alpine Pin Mill, type A630Z. Unit is a Kolloplex stud mill with one rotating disc and one stationary disc. Rotor is 24" diameter within a 42" diameter chamber, carbon steel construction. Previously driven by a 100 HP, 460V, 1800 RPM motor with v-belt drive to a 4600 RPM mill rotor speed. Mill has a capacity of up to approximately 8 tons/hr, 3-4mm feed, grinding sizes to 10 micron. Mill with 10" X 10" inlet/outlet. Previously used in flour milling operation. Good condition.


Carbon Steel Bag Filler/Packer, manufactured by WG Durant, model 100. Includes 13" X 15" X 16" deep feed hopper leading to 3" diameter screw discharge. Driven by 5 HP, 230/460V, 1760 RPM, 3/60Hz motor. Complete with start/stop switch. Good condition.
Supersack filler/loader with four (4) hooks for hanging bags. Includes pneumatic valve at feed with two (2) small blowers on top entering fill head. Complete with Applied Forces Model F-4 Digital Weight Indicator/Processor. Platform measures 59" X 50". Mounted on load cells.
Stainless Steel Gyratory Screen, manufactured by Sifter Parts & Service, model CS-1 Gyratory Sifter. Unit includes seven (7) decks measuring 36" X 36". 10" oversize/undersize discharges with 10" top feed. 
Jacobson Air Swept Carbon Steel Hammer Mill, grinding chamber measures 18" diameter with 7" discharge. Includes 9" X 11" Jacobson "3Row" feeder powered by fractional HP drive. Mill driven by 50 HP, 460V, 3545 RPM, 3/60Hz motor. 


Flour Milling Equipment In Stock:

S742046 Blower, 30 HP, Lobe Type, Robuschi, 3 in/out
S742045 Blower, 25 HP, Lobe type, Sutorbilt, Mdl 7LLV-4500
S742044 Blower, 25 HP, Lobe Type, Tuthill, Mdl 5507-46L2
S742047 Blower, 20 HP, Lobe Type, Tuthill, Mdl 7006-21L2
S742037 Blower, 15 HP, Lobe Type, Sutorbilt, Mdl 6 HF
S742042 Blower, 15 HP, Lobe Type, Sutorbilt, Mdl LVS 300
S742043 Blower, 10 HP, Lobe Type, 4 in/out
S742036 Blower, 10 HP, Lobe Type, Roots, Mdl 65 U-RA1
S742060 Blower, 10 HP, Lobe Type, Sutorbilt, 3,
S742058 Blower, 7.5 HP, Lobe Type, Sutorbilt, 3,
S742061 Blower, 3 HP, Lobe Type, Less Drive,
S742059 Blower, 3 HP, Lobe Type, Roots, Mdl 33 AF
S742033 Filler, Bag, Packer, Durant, Mdl 100, C/st,
S742032 Filler, Bag, Packer, Stoker, Mdl CR, C/st,
S742035 Filler, Bag, Packer, Stoker, Mdl DX, C/st,
S742034 Filler, Supersack, C/st, Bulk Bag, Digital Scale, Hooks,
S742029 Mill, Hammer, 18 Dia, Jacobson, Air Swept, 30 HP,
S742030 Mill, Hammer, 18 Dia, Jacobson, Air Swept, 50 HP,
S742028 Mill, Hammer, 18 Dia, Jacobson, Air Swept, 50 HP, S742028
S742149 Mill, Pin, Alpine, Mdl A630Z, C/st, 8 TPH, 10 Micron,
S742027 Screen, 36 X 36, S/st, 6-Deck, 3 HP, Gyratory,
S742026 Screen, 36 X 36, S/st, 7-Deck, 1 HP, Gyratory,
S742062 Separator, Cyclone, 24 X 52, C/st,
S742093 Separator, Cyclone, 13 X 36, C/st, Airlock,
S742150 Tank, 850 Gallon, S/st, 4' X 9', CB/FT,
S742095 Valve, Rotary, Airlock, 12, Rotolok,
S742084 Valve, Rotary, Airlock, 8, C/st, 1/3 Hp,
S742080 Valve, Rotary, Airlock, 8, C/st, Blower Application,
S742094 Valve, Rotary, Airlock, 8, C/st, Kice, 1/2 Hp, (2)
S742085 Valve, Rotary, Airlock, 8, C/st, Kice, 3/4 Hp, (2)
S742083 Valve, Rotary, Airlock, 8, C/st, Kice,
S742082 Valve, Rotary, Airlock, 8, C/st, Pfening, S742082
S742081 Valve, Rotary, Airlock, 8, C/st, Pfening,
S742091 Valve, Rotary, Airlock, 6, Smoot


 
OR
 


Machinery & Equipment Co.
San Francisco, CA
(415) 467-3400
info@machineryandequipment.com