We have finally caught up! Our standard lead times are back to 5 - 6 weeks! We have a 3 week quick ship option that should remain open for most orders. We also have a 10 day and 5 day quick ship option for cooling coils only at this time. Please check with your salesperson at the time of release to check if that 10 day or 5 day QS option is open.

What is meant by a "bank" of coils??
For those that work with HVAC installations on a regular basis, you have run across the problem of needing to install new water coils in very tight, confined areas. The coil is too big to fit in the elevator, and/or the HVAC room is so small that you are likely to damage the coil simply by moving it. 
As a solution to this challenge, chilled water coils are often installed in what are known as "banks" of coils. You are most likely to see this configuration in Air Handler Units, as well as "built-up" systems. Due to face velocity limitations across the coil, you will need larger coils in order to meet your required face area. With this in mind, there are a few specific reasons why you want to avoid having a single, large coil in one of your units. Starting with the obvious: larger coils are much more difficult to transfer and install. This is especially true for older buildings, where the rooms were essentially built around the HVAC system. 

As you've probably experienced, some of these areas can barely fit a single person, so installation - if even possible - is a logistical nightmare. 
Need A Replacement Heat Exchanger/Tube Bundle??
In much the same way as replacing HVAC coils, replacement heat exchangers and tube bundles usually entail some sort of emergency. Capital Coil is your solution to this problem...(see lead times & quick-ship options below).
Cross-referencing the model # is the easiest method to ensure that the correct duplicate is built. While you may not have that information at your fingertips, there is an extremely good chance that Capital Coil will. Capital Coil has an extensive library of almost any model that you're likely to come across, including all of the major OEM's. Call and ask to speak with a sales engineer, or simply send us a picture of the tag with the model & serial number, and we will do the rest. 
‌
Matt Jacobs- President
mjacobs@capitalcoil.com
484-498-8660 ext. 102 
Dan Jacobs- Vice President
djacobs@capitalcoil.com
484-498-8660 ext. 101
Capital Coil & Air
21 Turner Lane
West Chester, PA 19380
1-800-494-0447