|
Lost revisions kill time and trust. If the floor cannot tell which file is the latest, you get wrong programs, rework, and late parts. Version control is about one source of truth, clear naming, and a simple release process the whole team follows.
Use a strict naming convention.
Include part number, customer, material if relevant, machine, op, and a rev tag. Example: 12345_Acme_Al6061_HAASVF2_OP20_REVC. Add the date only for working copies, not for released programs, since dates stack but revs tell the story.
Keep a single source of truth.
Store CAM files, posts, stock models, fixtures, and NC files in a controlled directory or PDM vault. Give programming write access, give the shop read access. Point the DNC or networked controls to a read only Released folder so the machine never pulls a sandbox file.
Separate working and released areas.
Work in a Work in Progress folder, then copy only approved NC and setup sheets to Released. Lock Released so no one edits in place. If a hot fix is needed, make a new rev rather than overwriting files.
Track what changed and why.
Maintain a simple change log in the CAM file or a README. Note rev, date, who, and why, for example feed bump on Tool 7, new soft jaw step, probing added before OP30. Export the change log onto the setup sheet so the floor sees it at a glance.
Version your dependencies.
Lock tool libraries and holder assemblies, then update them by rev, not by ad hoc edits. Keep fixture models and stock models with the job, and reference by relative paths so the CAM file always finds the right versions.
Control posting and identification.
Standardize posts by machine, and include program number, part number, and rev in the NC header. Post to an auto stamped folder that matches the rev. Keep a Released NC archive so the last good file is always one folder away.
Use a lightweight release checklist.
Before promoting to Released, verify WCS and offsets, simulate with full assemblies, run a quick peer review, and update the change log. Tag the rev in your vault or add an ECO number if you use one. A two minute checklist prevents expensive surprises.
Plan for rollback and comparison.
Archive prior revs and use a G code diff tool to compare changes. Store checksums or signatures of released NC so you can prove what ran on the machine if a question comes up later. Traceability saves arguments and protects shipments.
Bottom line:
Clarity beats heroics. Clean names, one source of truth, and a simple release path keep programs reliable and the shop moving.
Have a programming question?
Send it in for the next edition of Ask a CAM Pro!
|