|
A chip-breaking or full-retract peck lets coolant reach the tip and clears chips before they pack up. Too shallow and you’re compacting; too aggressive and you're generating heat faster than your coolant can keep up.
Coolant counts.
High-pressure through-spindle is the gold standard, but even basic flood coolant helps—if it’s aimed right. No coolant on hand? Drop your RPM or look into MQL. Drilling dry at high speed is a recipe for tool wear.
Watch your surface speed.
It’s easy to underestimate how much heat drilling generates, especially in harder materials. Keep an eye on your SFM and dial in your feed to hold a consistent chip load. Don’t let friction get the upper hand.
Start with a pilot hole.
For tighter tolerances or deep holes, a pilot hole helps your drill stay true, cut cleaner, and reduce overall heat. It’s a small move that pays off big.
Bottom line?
The faster you drill, the more heat becomes your enemy. Control it up front, and you’ll keep your tools sharp, your finishes clean, and your parts right on the money.
Have a programming question?
Send it in for the next edition of Ask a CAM Pro!
|