Marathon Spray Booth Arriving Soon |
|
Dear N-Hance Canada Franchise Owners,
We are expecting our first shipment of 5 new Marathon spray booths, to be arriving next week. We are already seeing a lot of interest in these booths and they are a great addition to any workshop.
To place an order, please reach out to Dania.
For any questions or for more information, please reach out to Kimberly or Dania.
Sincerely,
N-Hance Canada
|
|
Marathon Spray Booth System
N1500-76
|
|
The cost of the SPB 76F Galvanized Spray Booth is:
$16,895.00
76 inches wide - floor length
N1500-76
Galvanized
|
|
We are expecting our first shipment of the new Marathon spray booth, to be arriving in the next 2 weeks. We are already seeing a lot of interest in these booths and they are a great addition to any workshop. Please reach out to Kimberly Jones if you have any questions or you require any additional information.
|
|
Marathon Spray Booth is a full height, ductless booth. Built with the highest quality and cutting edge engineering method it is unmatched in size, quality, and value.
Marathon spray booth is simple to operate and maintain, yet offers all the benefits of a full size booth. Compact spray booth housing is made from 18 gauge steel, laser CNC precision cut, with holes cut 6 inches on center, with full, 2 inch companion flanges.
|
|
Benefits of the SPB 76F Spray Booth
- Reduce shop square footage
- Meets NFPA 33, OSHA, and EPA Requirements
|
|
Characteristics: SPB 76F Booth
76 inches wide - floor length
N1500-76
Galvanized
Characteristics of the SPB 76F Galvanized Booth:
- Unmatched in size, quality, or value... ANYWHERE!
- Built with the highest quality and cutting edge engineering methods that undeniably set the benchmark that others cannot match.
- Uses the exact same materials, components, and design techniques as a larger full-size booth.
- Made from 18 gauge steel, laser CNC precision cut, with holes cut 6 inches on center, with full 2 inch companion flanges.
- Solid nut and bolt construction.
|
|
|
|
Air Flow
Ambient, or surrounding air, is drawn in directly through the front end of the booth. If there is dust or other particulates in the surrounding air, these will be drawn into the booth, and may contaminate the environment, so be aware of the air quality in your facility.
Exhaust
Once the air has traveled through the booth, the air is filtered through 4 stages of filters (described below) and is directed out the top of the booth. In most cases, the 4 stages of filtration are adequate, and therefore no ducting is required.
|
|
Certifications and Standards
The ETL Listed Mark (shown below) indicates that Marathon Finishing products have been evaluated and tested by Intertek, a Nationally Recognized Testing Laboratory (NRTL) and have been found to meet or exceed all required national safety standards for the US and Canada.
The Spray Booth meets or exceeds the following national safety and fire standards:
- International Fire Code (IFC)
- National Fire Protection Assn. Code 1 (NFPA 1)
- National Fire Protection Assn. Code 33 (NFPA 33)
- National Fire Protection Assn. Code 70 (NFPA 70)
- International Mechanical Code (IMC)
- Occupational Safety Hazards Assn. (OSHA)
|
|
Inner Dimensions (Spray Area)
Height: 77.875" (1,978 mm)
Width: 76" (1,930 mm)
Depth: 30" (762 mm)
Outer Dimensions
Height: 90.5" (2,299 mm)
Width: 80" (2,032 mm)
Depth: 66.75" (1,695 mm)
Base Model Approx. Shipping Weight
750 lbs.
CFM
4,220
Motor
1.5 hp
Electrical
120 Volt
Single Phase
60 Hz
20 Amps.
1st Stage Filter
Pre-Filter
Size: 24" (610 mm) x 24" (610 mm) x 2" (50.8 mm)
2nd Stage Filter
Fiber Filter
Size: 24" (610 mm) x 24" (610 mm) x 2" (50.8 mm)
3rd Stage Filter
Pleated Filter
Size: 24" (610 mm) x 24" (610 mm) x 2" (50.8 mm)
4th Stage Filter
Carbon Filter
Size: 24" (610 mm) x 24" (610 mm) x 11" (279 mm)
|
|
Should you require any assistance or have any questions, you may contact our staff members by email or at their direct lines by phone or text message.
Operations, Product Sales, Communications, Franchise Support
Dania Najam
Direct/ cell: 647-456-4316
Office: 1-888-823-4822 ext. 226
IT and Online Marketing
Ahmad Alkukhun
Direct/ cell: 905-510-3023
Office: 1-888-823-4822 ext. 224
Franchise Support
Tania Fraser
Direct/ cell: 905-580-3508
Dania Najam
Direct/ cell: 647-456-4316
Office: 1-888-823-4822 ext. 226
Alexander Elhamad
Office: 1-888-823-4822 ext. 228
alex.elhamad@nhancecanada.ca
Corporate and Client Sales
Kimberly Jones
Direct/ cell: 416-889-9669
1-888-823-4822 ext. 227
FMS
Shelley Berman
Email: shelley.berman@fmsfranchise.com
Scott McCarthy
Email: scott.mccarthy@fmsfranchise.ca
onTrack/ Service Monster
support@servicemonster.net
1-888-901-3300
Accounting
Cristal Borges
cborges@aandjcpa.ca
Engy Amin
Direct/ office: 905-916-2300 ext. 110
|
|
N-Hance Canada | www.nhancecanada.ca | 1.888.823.4822 |
|
|
|
|
|
|
