WS Aware Monitor
WS Aware Monitor with Ethernet Connectivity
Continuously monitor operators and their workstations throughout your entire process
  • NEW Ethernet Connectivity
    Provides network communication with Static Management Program (SMP)
  • NEW Optical Relay Terminal
    Pairs with lights and buzzers for increased performance visibility
  • Dual Workstation Continuous Monitor
    Continuously monitors the path-to-ground integrity of two operators, two conductive or dissipative worksurfaces, and two metal tools; meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-01
  • Digital Signal Processing Technology
    Applies an ultra-low test voltage to the operator (0.05V) for the handling of sensitive components
  • Operator Body Voltage Detection
    Alarms if the operator generates or comes in contact with voltage that would be dangerous to an ESD susceptible item
  • Remote Terminals with Big Brother Sensor (770062 only)
    Detects the presence of an operator and alarms if a wrist strap is not connected to prevent ungrounded handling of ESD susceptible items 
770061 WS Aware Monitor with Standard Remotes
770062 WS Aware Monitor with Big Brother Remotes
Static Management Program
SCS Static Management Program (SMP) continuously monitors your ESD process control system throughout all stages of manufacturing. SMP captures data from SCS workstation, equipment and ESD event continuous monitors and provides a real-time picture of critical manufacturing processes. All activity is stored into a database for on-going quality control purposes. SMP allows you to pinpoint areas of concern and prevent ESD events. Quantifiable data allows you to see trends, become more proactive and prove the efficiency of your ESD process control system.

926 JR Industrial Drive, Sanford, NC 27332 
East: 919-718-0000 West: 909-627-9634
Email:  |  Web: