When a hazard assessment is completed and a need for fall protection is established, there are two general types of systems that can solve the need and keep the workers safe.
The first, and generally accepted as the preferred method, is a Passive Fall Protection System, the second is an Active Fall Protection System. When a Passive Solution is not practical for the application, an Active Fall Protection System is the next best solution.
Does not move, adapt or change when in or out of use
Does not require the use of personal protective equipment or active participation from the worker
Typical systems include: fall arrest and fall restraint systems
Dynamic
Requires the use of special equipment as well as worker participation
Workers using the system must have working at heights training
Hierarchy of Fall Protection
Eliminate the Risk - If possible
Guard the Hazard - Install an engineering control such as a guardrail that meets the OH&S requirements
Protect the Worker - If the use of a Guardrail is not feasable, workers must use a fall restraint system
RoofGuard systems have been designed and engineered to answer number two in the hierarchy outlined above.
RoofGuard is a counter-weighted, free-standing guardrail system, which protects employees working at or near the roof edge from falls. It exceeds all major North American safety standards, protects you from unnecessary liability/fines, and complies with all working at heights legislations.
