Tooling Paste for Custom Shapes Video Demonstration Featuring: Tony Turner AIN Plastics, Division of ThyssenKrupp Materials NA
Mark Davidson RAMPF Group
Udo Tartler Tartler Machines
|
AIN Plastics + RAMPF GROUP + Tartler Machines Working Together for Better Product and Best Services
![Photo - Tony T Applying Paste](https://ih.constantcontact.com/fs023/1102418460021/img/149.jpg?a=1112537026504)
AIN Plastics has been selling RAMPF GROUP Tooling board for many years, in fact, we are one of the largest distributors of tooling board in the country. So, when we had the opportunity to take on RAMPF GROUP's new paste materials we wanted to be on board right away. RAMPF Group, a strong leader in the tooling board manufacturing business developed three versions of RAKU-TOOL� Close Contour Paste; each is a 1 to 1 mix ratio that applies easily, even on vertical or overhead surfaces at thicknesses up to 40mm. The paste applies to numerous substrates including acrylic, wire mesh, foam, or tooling board to name a few.
When machined, the cured paste creates very little dust and finishes to an extremely smooth surface that can be finished as needed. To make their product even more successful RAMPF knew having the right dispensing equipment was also a must. So, RAMPF Group worked diligently with Udo Tartler, founder of Tartler machines, who began creating two-part meter mix equipment in the early 1980's.
Udo Tartler, President of Tartler Machines
Mark Davidson, RAMPF Sales Manager noted that "Tartler is on a constant path to create
![Tartler 2-part meter mix dispenser](https://ih.constantcontact.com/fs023/1102418460021/img/166.jpg?a=1112537026504) | Tartler Machine's Two-Part Meter Mix Low Pressure Dispenser |
new and better equipment and to refine their existing equipment. They have listened to the needs of both the end user as well as the product manufacturers, and that's why we wanted to partner with them. He went on to say "once we were confident in our product and working with Tartler we brought the process to AIN Plastics who immediately saw the value." Unlike some past machines that ran on high pressure, Tartler equipment runs on a safe low pressure system. The equipment is easy to use, cleans up within 15 minutes, and outputs a smooth steady flow of paste at a consistent viscosity. The RAKU-TOOL� Close Contour Paste and Tartler dispensing machine is a far cry from the early days of epoxy tooling paste systems. |
|
![Tooling Paste for Custom Shapes](https://thumbnail.constantcontact.com/remoting/v1/vthumb/YOUTUBE/a8543531bc2344639598fbfd58dfa25d) | Tooling Paste for Custom Shapes |
|
AIN Plastics Now Offering Custom Paste Application Services AIN Fills Need by Supplying Paste and Offering custom applications to those who don't have dispensing equipment.
![Paste being applied in overlapping rows](https://ih.constantcontact.com/fs023/1102418460021/img/163.jpg?a=1112537026504) | Mark Davidson shows how to apply paste in overlapping rows |
In addition to supplying RAKU-TOOL� Close Contour Paste, John Shepherd, President of AIN Plastics, announced that AIN is now available, on a per job basis, to complete custom applications of RAKU-TOOL� Close Contour Paste for customers at the AIN Madison Heights facility. In fact, by the time of this post, AIN has already completed four large paste application projects. John Shepherd noted, "We listened to our customers who voiced concerns about using paste in the past. The first concern is the time to apply the paste and the time until it can be machined. Typically the two-part epoxy paste is fully cured in 24 hours. But, for many places running an assembly line the cure time has been a limiting factor in their ability to put this product to use. Places that don't do large volume also noted the cost of the equipment as a factor. We are looking to be an asset to our customers and we realized this was a great opportunity to fill a gap in an industry that can really benefit from this product."
![](https://ih.constantcontact.com/fs023/1102418460021/img/165.jpg?a=1112537026504) | Car showing all phases of paste application and foam base |
The value to building custom shapes can be a huge savings in both time and material. It also eliminates issues such as glue lines and how to handle left over pieces of board and the end product is fantastic. By using the new service at AIN Plastics customers can take advantage of the benefits of the using paste without investing heavily in assembly line time or in equipment purchases. Meanwhile those companies that make the investment in the dispensing equipment can be assured of excellent product availability and customer support.At a recent demonstration of the product dispensing, visitors were all impressed by the quality and ease of use that RAMPF Group, Tartler Machines, and AIN Plastics are now able to provide with this new joint venture of product, equipment, and customer sales and support. |
|