We have this Stephens Thoroughbred portable concrete plant available for
immediate delivery.  This plant was set up at the Stephens booth for Con Expo so if you were there you may have seen it.  It's wired and painted and ready to go. There are long lead times for plants from most manufacturers right now so if you are considering one this is a great opportunity to skip to the front of the line.  Give us a call at (877) 327-2116 to make arrangements!

 
  • Agg frame: 67lb frame in lieu of 48lb frame. (MB-10-065-00310)
  • Cement Section:  Silos on 67lb. beam in lieu of 31lb. beam  (MB-10-004-00220)
  • Liners for sloping wear points of aggregate batcher: Sloping sides of batcher will be constructed of 1/4" steel with 1/4" A/R liner in sloping wear points.  (Brinnell 400)   Weld In:  (SB-10-040-00101)
  • Liners for sloping wear points of overhead bins: Sloping sides of gate section will be constructed of 1/4" steel with 1/4" A/R liner on sloping wear points.  (Brinnell 400)  Weld In:  (SB-10-080-00101)
  • Addition for 4th compartment bin for 70-ton bin, includes gates and solenoids.  (MB-10-090-00300)  *Note: These can be hinged down and shipped one piece if silo is shipped separate (in line compartments only.)
  • Optional silo size (lieu of 374 BBL) (note: any silo larger than 528 BBL will result in an additional load of freight.) 4279 Cu Ft 1,069 BBL x 2  Two compartment silo, with 4" double wall partition (split 60/40) with penetration check plug.  Option includes second: filter vent, bin level indicator and aeration pads with solenoid.  Shipped as a second load of freight.  Silo capacity will be less 4% because of double wall.  (MB-10-392-00800)
  • Bin level indicators (Extra bin level in silo with high lights. Mounted on top, wired in liquid tight flexible metallic with lighted signaled mounted in box.  (ELE-MFG-1000350)
  • Work platforms: Cement Batcher work platform will be on three sides.   Platform includes toe board and pipe handrails around work platform. Painted same color as plant.   (SB-10-343-00500)
  • Water weigh batcher: (500 gallon) Complete with lever systems one "s" type load cell and 10 VDC digital readout, discharge valve with actuator, limit switches, and solenoid.  In lieu of 3" water meter.  (no platform.)  6" discharge valve.  With standard work platform (SB-10-355-00320)
  • *Water Holding Tank:  500 gallon with level probes.  Probes will give empty signal when used with water meter or full signal when used with batcher. Includes a 6" discharge valve with actuator and solenoid.  Support frame included in price of water batcher.  (If filling a Stephens water batcher a 3" valve, actuator and solenoid for feeding water holding tank will be included).  (SB-10-350-00110)
  • 36" x 41' transfer conveyor in lieu of 30" standard. (Channel type),308: with 30HP motor, with belt wiper.  (3 ply belting) 308 FPM, 836 TPH Standard  (MB-10-214-00410)
  • 400AMP main disconnect in lieu of 200 AMP (ELE-MFG-1000423)
  • SOS-1020 x 2 in lieu of two SV-170 vents  (VB-10-415-0020G)
  • (14) Low pressure aeration blower: Ring compressor type, supplies low pressure dry air to aeration diffusers in silo.  Stable airflow, no pulsating air, no motor brushes or sliding valves to require periodic maintenance.  Wired with liquid tight flexible metallic conduit.  Includes 5Hp magnetic starter, controls, and necessary manifolds.  Two compartment or two silos (includes two solenoids) with batcher.  (ELE-MFG-1000630)
  • 1069 BBL silo internal 5" fill in lieu of 4" (SB-10-308-00304)
  • One electric vibrator  in lieu of two (2) air vibrators on aggregate batcher.  (ELE-MFG-1000445)
  • Inspection pipes (sample ports). 4" in cone of silo.  (SB-10-308-01101)
  • Deduct digital readouts from plant only.  (205-A)
  • Deduct manual pane from plant only.  ELE-MFG-1000338)
     
 

Take advantage of this great deal!  Call (877) 327-2116 or visit our website at www.mixerandplantparts.com to order.  Have a need for a different part?  Visit our site for a HUGE selection of parts for the Concrete and Heavy Duty Truck industries. We look forward to serving you!
 
Sincerely,
 
Brandon Syler
Mixer & Plant Parts Mfg.