Inclinometer

The TSafe system features a new two axis inclinometer that can monitor the vehicles angle left to right and front to back up to a maximum of 23 degrees in 0.1 degree increments, to enable the TSafe system to be used on almost any type of vehicle from a small tipper to a large quarry dump truck to prevent tipper roll-overs when tipping on uneven ground. We have also incorporated a body raised sensor which allows separate alarm angles to be programmed for body up or down positions and to alert the driver that the tipper body is raised.

High Voltage Detection System (HVDS)

Building on our vast experience of Overhead Power Cable Detection the new TSafe system has our most advanced HVDS yet. The HVDS is designed to prevent vehicles and machinery with a variable height from coming into contact with high voltage overhead power lines. New detection circuitry gives almost double the detection range, sensitivity and noise rejection over our existing HVDS unit. The TSafe's HVDS can be fully adjusted to suit the operating environment and gives a visual indication of detected signal strength and range. A new high gain detection antenna further improves the systems detection capabilities giving full 360-degree high voltage cable detection out to 25 meters on 11Kv overhead power lines.

Data Recording

The system features a newly developed data recording function which acts like a 'black-box' recorder and in the event of an incident the built in SD card memory can be interrogated to display all parameters and the status of various inclinometer angles, high voltage detection and body raised sensors against a time and date stamp. The recorded log can either be viewed on screen or exported to spreadsheet software such as Microsoft Excel.

TSafe's large 3.5" (90mm) touch screen is easy to read and requires very little operator input. It is also very secure in that a management PIN code protects all setting and management menus. There are also several built in fail safe and anti tamper devices. 

Also available for use on ADT's

 

Main Features:

• High Voltage Overhead Cable Detection (HVDS)
• Inclinometer can measure vehicle angle Left/Right and Front/Back up to 23 degrees.
• Large 3.5" (90mm) back lit touch screen display.
• Wired or Wireless connection of sensors and HVDS  nodes.
• Wireless range up to 100m (433Mhz)
• Up to 4 HVDS nodes can be connected for detection across larger vehicles and cranes.
• Fully adjustable High Voltage Overhead Cable Detector with signal strength indicator.
• Body raised/lowered indicator
• Fully adjustable alarm settings for body/boom raised or lowered
• Spoken voice warning alarms (can be programmed for various languages)
• Full data recording of all parameters and alarm activations. The system will log all events with a time/date stamp
• Management code protected to prevent tampering.
• RS485 compatible
• Two dry contact auxiliary relay's to switch external devices when the system alarms
• Auto resetting alarm mute
• Mute, watchdog and alarm outputs for connection to external data/telematics systems
• External dual message talking warning sounder
• Plug & Play connections to each module makes installation and servicing simple
• 10-28v wide power input.