SITECH virtual training helps you get the most out of your technology investment
2021 SITECH
Virtual Winter Training
SITECH of Indiana will be conducting our winter training sessions virtually via WebEx. If you have any questions please contact Sam Hale at samhale@sitechindiana.com or 317-937-7376. These will be held at no cost. The advanced Trimble Business Center classes have limited seating. If you would like to register please click the link below. Once your registration is received we will follow up with an email containing a link to the WebEx and other needed information. Thank you for your understanding as we continue to navigate the needs of customers while keeping everyone's safety in mind.


 
New GPS Site Set-up and Calibration with Trimble Siteworks
February 2, 2021 9:00am - 11:30am
Location - Virtual via WebEx
This course is intended for anyone charged with setting up new GPS jobsites.
We will cover what information you need to request ahead of time and how to handle and convert job files. We will also go over how to set up the base station, rover, perform a site calibration, and create data for GCS900, CAT Accugrade, and Trimble Earthworks. This will be a virtual class via WebEx.
 
Trimble GCS900 / CAT Accugrade 3D Operators Training
February 3, 2021 9:00am - 11:30pm
Location - Virtual via WebEx
This course is intended for machine operators that need to understand and use Trimble GCS900 and Cat Accugrade GPS machine control.
This course will teach components needed for GPS Machine Control, installing the components, basic screens and menus in the GPS display, and daily machine operation techniques. Course taught virtual via WebEx.
 
Trimble Siteworks Basics for Grade Checking and Staking
February 4, 2021 9:00am - 11:30am
Location - Virtual via WebEx
This course is intended for site supervisors, foremen, and grade checkers.
 
This course will teach students how to setup a GPS rover and basic functionality of Trimble Siteworks field software. Data file structure and file management will be discussed for the TSC7 and Trimble Tablet style data collectors. Components of site positioning will be discussed, as well as how to operate the components. Course taught virtual via WebEx.
 
Trimble Earthworks 3D Operators Training
February 5, 2021 9:00am - 11:30am
Location - Virtual via WebEx
This course is intended for machine operators that need to understand and use Trimble Earthworks machine control.
This course will teach components needed for GPS Machine Control, installing the components, basic screens and menus in the GPS display, and daily machine operation techniques. Course taught virtual via WebEx.
 
Trimble Siteworks Advanced
February 9, 2021 9:00am - 11:30am
Location - Virtual via WebEx
This course is intended for site supervisors, foremen, and grade checkers.
This course will build upon the foundation provided in Basic Trimble Siteworks Grade Checking and Staking. Students will learn how to use Siteworks to perform topographic surveying, volume calculation, line stakeout, feature stakeout, and other advanced features of Siteworks. Course taught virtual via WebEx.
 
Introduction to Trimble Business Center V5.XX
February 10, 2021 9:00am - 11:00am
Location - Virtual via WebEx
Trimble Business Center is a powerful software tool for all phases of construction. This course is intended for construction contractors, data managers, surveyors and engineers who would like to have an understanding of how Business Center is used in construction technology.
 
This is an introductory class and prerequisite for more advanced TBC classes. We will cover self-help tools, project settings, using templates, importing data, viewing tools and other basic concepts used throughout most TBC workflows. We will also introduce the TBC add on editions that unlock the full power of Trimble Business Center. Class will be taught virtual via WebEx.
 
Attendees are encouraged to have Trimble Business Center V5.xx loaded on PC before attending course. We would also recommend a dual monitor set up along with a wheeled mouse to follow along. Sample data will be provided.

 

 
Data Prep with Trimble Business Center V5.XX
February 16, 2021  8:00am - 12:00pm
Location - Virtual via WebEx
Trimble Business Center is a powerful software tool for all phases of construction. This course is intended for construction contractors, data managers, surveyors and engineers who would like create 3D models with TBC. Class will be taught virtually via WebEx and will be capped at 15 people per session.
 
We will cover:
  • Importing multiple data types
  • Standardized layers
  • Elevate contours/lines
  • Create surfaces
  • Clean up drawing file
  • View/Check surface
  • Understand Data Prep menu
  • Export GCS/SCS900
All students will need Trimble Business Center v5.xx loaded on their PC and have a minimum of Site Modeling Edition for this class. If you do not have this edition, you will need to be enrolled in the 10-day trail which we can assist with. We would also recommend a dual monitor set up along with a wheeled mouse to follow along. Sample data will be provided.
 


Basic Dirt Takeoff with Trimble Business Center V5.XX
February 17, 2021 8:00am - 12:00pm
Location - Virtual Via WebEx
Trimble Business Center is a powerful software tool for all phases of construction. This course is intended for construction contractors, data managers, surveyors and engineers who would like to utilize Business Center for simple dirt takeoff. Class will be taught virtually via WebEx and will be capped at 15 people per session.
 
We will cover:
  • Create surfaces using site modeling tools
  • Import PDF vector/raster
  • Basic heads-up digitizing
  • Topsoil stripping/replacement      
  • Creating subgrade adjustments
  • Reporting - cut/fill map/PDF/Excel
All students will need Trimble Business Center v5.xx loaded on their PC and have a minimum of Site Construction Edition for this class. If you do not have this edition, you will need to be enrolled in the 10-day trail which we can assist with. We would also recommend a dual monitor set up along with a wheeled mouse to follow along. Sample data will be provided.
 

 
New GPS Site Set-up and Calibration with Trimble Siteworks
February 16, 2021 9:00am - 11:30am
Location - Virtual via WebEx
This course is intended for anyone charged with setting up new GPS jobsites.
We will cover what information you need to request ahead of time and how to handle and convert job files. We will also go over how to set up the base station, rover, perform a site calibration, and create data for GCS900, CAT Accugrade, and Trimble Earthworks. This will be a virtual class via WebEx.
 
Trimble GCS900 / CAT Accugrade 3D Operators Training
February 17, 2021 9:00am - 11:30pm
Location - Virtual via WebEx
This course is intended for machine operators that need to understand and use Trimble GCS900 and Cat Accugrade GPS machine control.
This course will teach components needed for GPS Machine Control, installing the components, basic screens and menus in the GPS display, and daily machine operation techniques. Course taught virtual via WebEx.
 
Trimble Siteworks Basics for Grade Checking and Staking
February 18, 2021 9:00am - 11:30am
Location - Virtual via WebEx
This course is intended for site supervisors, foremen, and grade checkers.
 
This course will teach students how to setup a GPS rover and basic functionality of Trimble Siteworks field software. Data file structure and file management will be discussed for the TSC7 and Trimble Tablet style data collectors. Components of site positioning will be discussed, as well as how to operate the components. Course taught virtual via WebEx.
 
Trimble Earthworks 3D Operators Training
February 19, 2021 9:00am - 11:30am
Location - Virtual via WebEx
This course is intended for machine operators that need to understand and use Trimble Earthworks machine control.
This course will teach components needed for GPS Machine Control, installing the components, basic screens and menus in the GPS display, and daily machine operation techniques. Course taught virtual via WebEx.
 
Trimble Siteworks Advanced
February 23, 2021 9:00am - 11:30am
Location - Virtual via WebEx
This course is intended for site supervisors, foremen, and grade checkers.
This course will build upon the foundation provided in Basic Trimble Siteworks Grade Checking and Staking. Students will learn how to use Siteworks to perform topographic surveying, volume calculation, line stakeout, feature stakeout, and other advanced features of Siteworks. Course taught virtual via WebEx.
 
Introduction to Trimble Business Center V5.XX
February 24, 2021 9:00am - 11:00am
Location - Virtual via WebEx
Trimble Business Center is a powerful software tool for all phases of construction. This course is intended for construction contractors, data managers, surveyors and engineers who would like to have an understanding of how Business Center is used in construction technology.
 
This is an introductory class and prerequisite for more advanced TBC classes. We will cover self-help tools, project settings, using templates, importing data, viewing tools and other basic concepts used throughout most TBC workflows. We will also introduce the TBC add on editions that unlock the full power of Trimble Business Center. Class will be taught virtual via WebEx.
 
Attendees are encouraged to have Trimble Business Center V5.xx loaded on PC before attending course. We would also recommend a dual monitor set up along with a wheeled mouse to follow along. Sample data will be provided.
 

 
Data Prep with Trimble Business Center V5.XX
March 2, 2021  8:00am - 12:00pm
Location - Virtual via WebEx
Trimble Business Center is a powerful software tool for all phases of construction. This course is intended for construction contractors, data managers, surveyors and engineers who would like create 3D models with TBC. Class will be taught virtually via WebEx and will be capped at 15 people per session.
 
We will cover:
  • Importing multiple data types
  • Standardized layers
  • Elevate contours/lines
  • Create surfaces
  • Clean up drawing file
  • View/Check surface
  • Understand Data Prep menu
  • Export GCS/SCS900
All students will need Trimble Business Center v5.xx loaded on their PC and have a minimum Site Modeling Edition for this class. If you do not have this edition, you will need to be enrolled in the 10-day trail which we can assist with. We would also recommend a dual monitor set up along with a wheeled mouse to follow along. Sample data will be provided.
 

 
Basic Dirt Takeoff with Trimble Business Center V5.XX
March 3, 2021 8:00am - 12:00pm
Location - Virtual via WebEx
Trimble Business Center is a powerful software tool for all phases of construction. This course is intended for construction contractors, data managers, surveyors and engineers who would like to utilize Business Center for simple dirt takeoff. Class will be taught virtually via WebEx and will be capped at 15 people per session.
 
We will cover:
  • Create surfaces using site modeling tools 
  • Import PDF vector/raster
  • Basic heads-up digitizing
  • Topsoil stripping/replacement      
  • Creating subgrade adjustments
  • Reporting - cut/fill map/PDF/Excel
All students will need Trimble Business Center v5.xx loaded on their PC and have a minimum Site Construction Edition for this class. If you do not have this edition, you will need to be enrolled in the 10-day trail which we can assist with. We would also recommend a dual monitor set up along with a wheeled mouse to follow along. Sample data will be provided.
 


STAY CONNECTED:

 SITECH of Indiana | 317-803-2580 | www.sitechindiana.com