Let SITECH help you get the most out of your technology investment
December 2019 Winter Training
SITECH of Indiana will be starting our winter training sessions December through February. If you have any questions please contact Sam Hale at samhale@sitechindiana.com or 317-937-7376. Cost is $100 per person and seating is limited. Our address is 7515 East 30th Street, Indianapolis IN 46219. We also offer customized training at your place or ours. Call for pricing or information


 
SCS900 V3.XX Basics for Grade Checking and Staking
Tuesday December 3 2019   8:00am - 12:00pm
Location - SITECH Office
This course is intended for site supervisors, foremen, and grade checkers.
 
This course will teach students how to setup a GPS rover and basic functionality of SCS900 V3.XX field software. Data file structure and file management will be discussed for the TSC3, TSC7 and Trimble Tablet style data collectors. Components of site positioning will be discussed, as well as how to operate the components. Course taught in classroom and field. SITECH will supply any needed equipment for this training.
 
GCS900 / Accugrade 3D Operators Training
Tuesday December 3 2019 8:00am - 12:00pm
Location - SITECH Office
This course is intended for machine operators that need to understand and use Trimble GCS900 and Cat Accugrade GPS machine control.
This course will teach components needed for GPS Machine Control, installing the components, basic screens and menus in the GPS display, and daily machine operation techniques. Course taught in classroom setting.
 
New GPS Site Set-up and Calibration
Wednesday December 4 2019 8:00am - 12:00pm
Location - SITECH Office
This course is intended for anyone charged with setting up new GPS jobsites.
 
We will cover what information you need to request ahead of time and how to handle and convert job files. We will also go over how to set up the base station, rover, perform a site calibration, and create data for GCS900, CAT Accugrade, and Trimble Earthworks. This will be both classroom and field training.
 
Introduction to Trimble Business Center V5.XX
Thursday December 5 2019 8:00am - 12:00pm
Location - SITECH Office
Trimble Business Center is a powerful software tool for all phases of construction. This course is intended for construction contractors, data managers, surveyors and engineers who would like to have an understanding of how Business Center is used in construction technology.
 
This is an introductory class and prerequisite for more advanced TBC classes. We will cover self-help tools, project settings, using templates, importing data, viewing tools and other basic concepts used throughout most TBC workflows. We will also introduce the TBC add on editions that unlock the full power of Trimble Business Center.
 
Attendees must have Trimble Business Center V5.xx loaded on PC before attending course and a wheeled mouse is encouraged.

 
Trimble Siteworks Basics for Grade Checking and Staking
Tuesday December 17 2019   8:00am - 12:00pm
Location - SITECH Office
This course is intended for site supervisors, foremen, and grade checkers.
 
This course will teach students how to setup a GPS rover and basic functionality of Trimble Siteworks field software. Data file structure and file management will be discussed for the TSC7 and Trimble Tablet style data collectors. Components of site positioning will be discussed, as well as how to operate the components. Course taught in classroom and field.
 
Robotic Total Station & "UTS" Set-Up for Site Positioning, Machine Control, and Paving
Wednesday December 18 2019 8:00am - 12:00pm
Location - SITECH Office
This course will teach you how to get the most out of your SPS930 "UTS" and other SPS robotic total stations on the jobsite. We will cover how to field calibrate and set up your robot for field and machine operation. We will cover basic site layout and measurements. We will also show you how to hand off the UTS to get the machine up and going.
 
*FREE* Utilizing Drone Data with Propeller
Wednesday December 18 2019 9:00am - 11:00am
Location - SITECH Office
This course is intended to demonstrate the workflow for getting usable data from your drone with Propeller. We will show how to set up to fly an automated DJI P4 Pro using built in DJI apps. We will discuss the accuracy gained from utilizing either multiple Aeropoints or a PPK drone. We will show the ease of uploading data and getting your site on the proper coordinate system so that data can be utilized in other software such as Trimble Business Center. Finally we will show the power of the Propeller portal for understanding current site conditions, progress, etc.
 
Trimble Earthworks 3D Operators Training
Thursday December 19 2019 8:00am - 12:00pm
Location - SITECH Office
This course is intended for machine operators that need to understand and use Trimble Earthworks machine control.
This course will teach components needed for GPS Machine Control, installing the components, basic screens and menus in the GPS display, and daily machine operation techniques. Course taught in classroom setting.
STAY CONNECTED:

 SITECH of Indiana | 317-803-2580 |  www.sitechindiana.com