October CATALOG 2019  |  Valid until 10/31/19
Fall Savings Are Here!
Dual-Path Alarm Communicators

Dual reporting pathways: IP and cellular. No dial capture, data bus decoding, or cloud servers to delay or compromise communications. Auto directs over first available and/or best pathway for quickest communications. Remote access to M1 controls with no port forwarding or extra fees! Supports ElkRP2 programming upload/download over IP or cellular pathways.
ELK-C1M14GSM
(GSM Version)
ELK-C1M1LTEV
(Verizon LTE Version
Self-Contained Siren/Strobe
The ENFORCER Siren/Strobes are multi-purpose devices: siren, speaker, and optional strobe (SH-816S-SQ only).

Features:
  • 120dB Warble-tone siren
  • Bright xenon tube strobe light (SH-816S-SQ)
  • Strobe light can be triggered separately from siren
  • 25W Speaker
  • Audio input for broadcasting messages or audio playback
  • 9~15 VDC operating voltage.
SH-816S-SQ/R (Red In Stock)
SH-816S-SQ/A (Amber*)
SH-816S-SQ/B (Blue*)
SH-816S-SQ/C (Clear*)
*Special Order Request
SH-816S-BQ
Self-Contained Siren
C612 Ceiling Speaker

The C612 delivers surprisingly good sound quality for its modest price.

  • 6½" Polypropylene Woofers
  • Power Handling: 85 Watts
  • Frequency Response: 45Hz - 20kHz
  • Replaces C610 Ceiling Speakers
C841 Ceiling LCR Speaker
The woofer and tweeter are angled 15 degrees, allowing you to put the speaker in the ceiling up by the screen while directing the sound at the listeners.

  • 8" Graphite Woofer
  • 1" Pivoting Silk Dome Tweeter
  • ±3db Bass & Treble Contour Switches
  •  Power Handling: 150 Watts
C791 Ceiling Speaker
An 8-inch polypropylene woofer gives the C791 shockingly powerful bass for the price—all the way down to 36 Hz, which is even deeper than the lowest note on an upright bass! 

  •  8" Polypropylene Woofers
  • 1" Pivoting Soft Dome Tweeters
  • Power Handling: 125 Watts
  •  Frequency Response: 36Hz - 20kHz
  •  Replaces C790 Ceiling Speakers

W672 2-Way Poly In-Wall Speakers

The W672 offers an affordable way to get good sound in a budget installation.

  • 100W, 6.5" polypropylene woofers
  • 1" pivoting silk dome tweeters
  • Freq resp: 36Hz–20kHz
  • Includes thin-bezel grilles held by neo magnets.
  • Plug-in detector line, mounting base included • Large wire entry port
  • In-line terminals with SEMS screws
  • Mounts to octagonal and single-gang back boxes, 4-square back boxes,
or direct to ceiling
  • Stop-Drop ’N Lock attachment to base
  • Removable detector cover and chamber
  • Built-in remote maintenance signaling
  • Drift compensation and smoothing algorithms
2W-B
 The 2W-B is a 2-wire, photoelectric i3 smoke detector.
4W-B
The 4W-B is a 4-wire, photoelectric i3 smoke detector.
MS-2 & MS-4 are a two/four zone conventional fire alarm control panel compatible with the new I3 smoke detectors from System Sensor, and provide such advanced features as drift compensation, maintenance alert, and freeze warning. Automatic synchronization of audio/visual devices is provided, using manufacturer protocol for System Sensor, Wheelock and Gentex appliances. The NAC protocol includes the ability to silence audible devices while strobes continue to flash, using only a single pair of wires.
MS-2

MS-4

SK-4

The SK-4 is a four zone conventional fire alarm control panel (FACPs) that bring the latest in microprocessor technology to conventional fire controls. The SK-4 is a 120 VAC FACP. This FACPs provide reliable fire signaling protection for small- to medium-sized commercial, industrial, and institutional buildings.

TX3 Series Access Control System can integrate with all TX3 series control panels (Keypad Voice Entry, Touch Voice Entry, Elevator Restriction), making property managers life simple and easy.
TX3-CX-6K-A

  • The TX3-CX-6K-A controller conveniently houses three 2-door controller boards providing a 6-door system kit.
  • The chassis can hold up to four 2-door controller boards in total, providing the provision to add one 2-door controller boards to extend the number of doors.
  • The system comes with 6 TX3-P300-HA card readers and one IP module, which can allow property managers/programmers to program the system remotely.
TX3-CX-4K-A

  • The TX3-CX-4K-A controller conveniently houses two 2-door controller boards providing a 4-door system kit.
  • The chassis can hold up to four 2-door controller boards in total, providing the provision to add two additional 2-door controller boards to extend the number of doors.
  • The system comes with 4 TX3-P300-HA card readers and one IP module, which can allow property managers/programmers to program the system remotely.
TX3-CX-8K-A

  • The TX3-CX-8K-A controller conveniently houses four 2-door controller boards providing a 8-door system kit.
  • The system comes with 8 TX3-P300-HA card readers and one IP module, which can allow property managers/programmers to program the system remotely.
  • The chassis can house up to four batteries either 4 or 6 AH. 4 transformers are included for each control panel board.
TX3-EMER-200KS-C

  • Illuminated LED display and button for the hearing impaired
  • Braille labeled configurable "Call" and "Emergency" button for the visually impaired
  • 200 Extension Storage capacity

TX3-CX-1
Our single door controller simplifies access control and is great for entry level access control applications.

  • 5,000 Users
  • Programming – local via USB or remotely via TCP/IP
  • Supports two card readers; one built-in and one externa optional Wiegand reader
  • Tamper detection for controller and communication cable cut
BAT-LTE-HIGH2

  • Easy Cellular LTE & Internet
  • Dual Hi-Gain Antennas: Increases Cellular range by up to 50%
  • Universal Panel Compatibility
  • Instant notifications via text/push, email, and computerized voice call
  • Eliminate costly truck rolls via remote panel programming
  • Remotely arm/disarm via Smartphone, Tablet, and PC
Trusted, proven design for commercial and residential takeovers.
Fast-installing, single-button enrollment.
RE508X
Universal Hardwired Translator

  • 8 zone input
  • Output: Connect+, GE, Honeywell, 2GIG, and DSC

RE524X
Universal Wireless Translator Repeater

  • Supports up to 128 zones
  • Input: GE, Napco, Honeywell, 2GIG & DSC
  • Output: GE, Honeywell, 2GIG & DSC
  • Repeater: GE, Honeywell, 2GIG & DSC
Proximity Card Readers

Host LED control and optical tamper output. Hidden mounting screws deter vandalism.
Potted for superior weather-resistance. Wiegand or Clock & Data output. HID & EM410x Prox Compatible. Includes vandal-resistant security and installation tool with every reader. Adhesive-backed mounting template reduces installation time and risk of mounting errors. Three bezels included with OP10, OP30, OP40 and OP45 reader models: black, charcoal gray & ivory.
OP40HONS
OmniProx Switch Plate, Single-Gang Reader
OP10HONS
OmniProx Mini-Mullion Reader
Interested in these deals? Call your Silmar Sales Representative or Contact us in the next link.
HELPING TO BUILD A SMARTER WORLD
TOLL FREE # 1-800.325.9708