Introducing the MiTek USP Stud Plate Tie ( TSP) 

TSP stud plate ties connect single or double top plates or mud sill plates to wall studs. This ensures a continuous load path from the top plate through the wall stud to the sill plate. Optional diamond nail holes allow for various uplift capacities with Min and Max nailing configurations.

Materials: 16 gauge
Finish: G90 galvanizing
Options: TSP is available in Triple Zinc. To order, add TZ to stock number, as in TSP-TZ
Codes: FL17236

Installation:
• Use all specified fasteners.
• Place bended portion over top plate or under sill plate.
• Min Nailing – Fill all round holes.
• Max Nailing – Fill all round and diamond holes.
FEATURES
  • Diamond nail holes for optional nailing when higher uplift is needed.
  • Bent flange allows for a more consistent and easier installation.
  • Min/Max nailing provide flexible installation options.
1) Allowable loads have been increased 60% for wind or seismic loads; no further increase shall be permitted.
2) NAILS: 10d x 1-1/2" nails are 0.148" dia. x 1-1/2" long, 10d nails are 0.148" dia. x 3" long.

For More Information About the TSP or Other Stud Plate Ties, Visit Our Website MiTek-US.com


Questions? We're here to help! Contact Customer Service  (800) 328-5934
We'd love to hear from you.