|
1) Ruby Canyon pedestrian gate lock was getting stuck. Removed the lock, replaced the inside pin, and assembled the lock back together. Confirmed it was now working properly.
2) Stoney Falls pedestrian gate latch was getting stuck. Made repairs to the pedestrian gate lock and confirmed it was working properly.
3) Mallory bridge pedestrian gate handle was not working. Removed lock reset handle pedestrian gate and was working properly.
4) Crimson Canyon pedestrian gate lock was repaired and is working properly.
5) Bluff Springs pedestrian gate handle was bent in wrong position. Removed the lock and reset the handle in original position. Pedestrian gate was working properly.
6) Lost Mill pedestrian gate was stuck open and the lock handle was in the wrong position. After adjusting the handle back to the original position, the pedestrian gate was working properly.
7) Repaired three different speed bumps in the Canyon Green Community. Speed bumps original anchors were broken and the bumps were coming apart.
8) Changing filters out to all three buildings. AC air filters from the rec center, two in the kitchen area, two in the gym area, two in the hallway area. We changed out with new air filters.
9) Security guard house two filters in the back room were replaced with new A/C air filters.
10) Splash pad downstairs A/C air filter was replaced with a new one and one upstairs in the bedroom area an A/C air filter was replaced with a new one.
11) Splash pad women’s restroom circulating fan was making a loud noise. Removed old ceiling circulating fan, replaced with a new one, and confirmed it was working properly.
12) Switch Back metal fence painted at 75'. Sanded crossbars and pickets down to bear metal. Started priming it to get ready for paint. Completed 75' of fence after sanding, priming, and painting it black. There’s over 2000 feet of this fence. This will be completed in small portions at a time.
| 
