Tuesday Tips
October 15, 2019

Six Steps for Six Weeks

For the next six weeks, we’ll be sending out six steps to help avoid a specific recycling industry safety hazard. This week, we’re discussing avoiding hazards with moving machinery, such as conveyors and balers.

If there is a safety issue you would like to see discussed in a future Himes Service Company Safety Snippet, please let us know !
Six Steps for 6 Weeks of Safety
Staying Safe Around Moving Machinery


Machinery with moving parts, such as conveyors and balers, can be dangerous to workers without a safety plan in place. Here are six steps to reducing the dangers of working around this heavy moving equipment:
1. Check Guards
Ensure that all guards and recommended safety mechanisms for your equipment are in place. Do not remove guards to increase productivity; a shutdown due to injury could quickly reverse any productivity gains otherwise created. Guards are created to maximize productivity while keeping workers safe.
2. Enforce Utilization of Guards
Never circumvent guards or climb on working equipment. Do not stand on a moving conveyor or push material into a hopper with your hands or feet. Avoid interacting with moving equipment in ways that can result in a fall into the equipment or getting caught in moving parts.
3. Maintain Equipment
By ensuring that equipment is in good working order, you can reduce the likelihood that workers will circumvent guards to make an adjustment. 
4. Install E-Stops
Install sufficient emergency stops to ensure that workers at each work station can quickly stop equipment if necessary.
5. Don't Get Caught
Avoid lose clothing, jewelry, long lanyards, or anything else that could be caught in moving parts.
6. Lockout
Create and utilize appropriate lockout/tagout procedures in the case that workers need to access a part of the equipment that is otherwise unsafe to access. Check out our previous Safety Snippet on Lockout/Tagout proecedures.
Roys Says Safety First!




Roy Says...


Safety

First!
Six Safety Steps for Six Weeks

Each week, we'll be sending out six steps for safety on one of these six topics.

1.        Staying Safe Around Moving Machinery
2.        Avoiding Slips, Trips, and Falls (Coming October 22)
3.        Avoiding and Responding to Biological Substances (Coming October 29)
4.        Avoiding Respiratory Hazards (Coming November 5)
5.        Minimizing Repetitive Motion and other Ergonomic Hazards (Coming November 12)
6.        Staying Safe Around Vehicles (Coming November 19)

HSC Service Provider, Memberships, and Distributor