Hi Everyone,

All four of us at the office remain healthy and our office is open for business as usual! But our lobby will be open on a "call for appointment" basis. If you placed a "Will Call" order and received a confirmation from Tina that it is ready for pick up, please call ahead (480-507-0866) and let us know when you plan on picking it up. That said, a few products are proving difficult to resupply due to shortages and delays from manufacturers as well as some shipping delays.

Shot Show 2020
I'm continuing to chip away at the list of new products from Shot Show. For some, I'm still waiting on samples for Test & Evaluation. Keep watching for new product launches in the upcoming weeks. Without going into details, here are just a few of the products we are evaluating and their status.
♦ Replacement for Light-Load™ - Arrived 03/18/20!
♦ AXIL TRACKR Electronic Earmuffs - Arrived 04/15/20!
♦ Hearing Armor Earplugs - Arrived 04/15/20!
♦ Brass Inner Deburr/Chamfer Tool - Arrived 03/04/20!
♦ Brass Outer Deburr/Chamfer Tool - Arrived 03/04/20!
♦ Tool & Die Makers Kit for Gunsmithing - Arrived 03/04/20!
♦ Red Dot Sights for Carry Optics
♦ Large Capacity Vibratory Brass Polisher - Cancelled!
♦ Fiber Optic Bore Inspection - Expected Late May!
♦ Brass Annealer - Uncertain.
♦ Ruger® Mini-14® Threaded Barrel Adapter - Arrived 04/03/20!
♦ More!!!

If you receive "RUGER NEWSROOM" emails, the issue sent on April 21st, has an awesome photo of the 8-round Super GP100® Competition Revolver in 9mm Luger that was announce back in December. A lot of us have been drooling over this since seeing it at Shot Show 2020! During Shot Show, Ranch Products was able to confirm that their S&W 929 Moon Clips fit just fine in this revolver!
Photo courtesy of Sturm, Ruger & Co, Inc.

Lee

TRACKR™ Electronic Ear muffs utilize audio compression and composite materials to yield an outstandingly functional hearing protection. Clear, smooth audio quality let’s you hear what you want while protecting your hearing from damaging loud sounds. Deep composite material ear cups, thicker ear pads and stiffer headband springs combine to yield both a comfortable fit and a 25 NRR rating.

Hearing Armor's triple-flanged-stem design fits most people and provides a Noise Reduction Rating (NRR) of 25dB. Sounds, at safe levels, are allowed to pass through into the ear canal, while potentially harmful noises (above 85dB) are reduced via a proprietary design that incorporates a special noise-reducing filter.

♦ 25dB Noise Reduction Rating (NRR)
♦ Lowers Potentially Dangerous Noise Levels Above 85dB
♦ Hear Safe Sound Levels as if you Weren't Wearing Ear Plugs
♦ Soft Tripple-Flanged Stems Provide Secure Seal
♦ Made from Medical-Grade Silicone
♦ Stays in Place While Wearing Headphones,
♦ Helmets or when Talking on Phone
♦ Comfortable for All Day Wear
♦ In Reusable Protective Storage Pod →

✓ To see all our hearing protection, safety
and training aids, Click Here.

Specially designed for Ruger® Mini-14® rifles, it provides 1/2″-28 male threads for attaching flash hiders, muzzle brakes, suppressors, etc. to your barrel.

✓ Need an adapter to convert from 1/2″-28 to 5/8″-24? Click Here.

These Powder Funnels are specially designed for the needs of bullsey shooters loading Double Ended Wad Cutter (DEWC) or Hollow Base Wad Cutter (HBWC) bullets in .38 Special cartridges. These bullets are much longer than normal bullets and seated flush to the case mouth. The original powder funnels just don't reach deeply enough into the case to properly prepare the case for seating these bullets.

This Powder Funnel was specially designed for loading 9mm cast/coated bullets sized to 0.358″ OD, that would provide for minimum swaging of the bullet’s base. To accomplish this the expander portion is almost three times longer than the standard 9mm/.38 Custom Powder Funnel. It is also sized to provide case expansion to accommodate projectiles up to 0.358″ diameter … preventing shaving polymer bullet coatings (e.g. Hi-Tek).

✓ Need Powder Funnels for other cartridges?
Click Here.

The Ammo-Burr are industrial quality tools for deburring and chamfering case mouths from 17-caliber up to 45-caliber. High-Speed Steel cutters ensure clean cut and long life.

Professional miniature deburring and scraping tools for providing a quality finish on small metal parts.

Unique Knives and LED Lights

CLIPSTER Knife w Money/Belt Clip™ ☆ ☆ ☆ NEW! ☆ ☆ ☆   • 2″ Locking Blade • All 420 Stainless Steel • Integral Money/Belt/ • Pocket Clip • Only 1.24oz Weight • Packaged in Reusable, • Waterproof HardCase • (not shown).   Item #: T1709   Click Here

NEBO® SLIM Pocket LED Light   • Rechargeable via USB • Dimmable: 500 lumen to 50 lumen • Memory Recall of Last Dimmer Setting • Anodized Aluminum Body • Water & Impact-Resistant • Collapsible Hanging Hook • Powerful Magnetic Base • Belt/Pocket Clip with Magnet • Slim Enough to Fit Pocket or Purse   Item #: T1696   Click Here

Click Here        

If you've never visited our "Garage Sale" page, it is a great place to find hot deals. It is a "One Stop Shopping Spot" to see all the products that are on a Clearance Sale, Blowout Sale or Final Closeout. Check back often as we are continuously updating the product list.

Q: I'm counting empty 9mm brass on your CTS-30000 Precision Counting Scale and am getting errors in the actual count compared to the scale's?

A: Increase your "sample" size. A 9mm Luger case weighs only about 0.12oz (3.5g). Even though the CTS-30000 scale has a resolution of 0.5g (0.017 oz) a sample size of only five cases is too small when your counting a bin that contains 500 cases. Try increasing your sample size to at least 25 cases.

R: Used a sample size of 50 cases and it is counting accurately now. Thanks for the help!

PS: Determining the correct sample size with a counting scale is a common problem. And most counting errors are caused by;
A) Trying to count items that are weight too little compared to the resolution of the scale. (The worse case scenario is trying to count an item that weighs less than the scale's minimum resolution.)
B) Using a sample size that is too small. (A larger sample size is always better.)

I'm planning on writing a Tips file that will help clarify how to determine that weight and sample size limits for any scale with counting capability.

This "Tips" file describes how to easily and inexpensively make spacers to allow die lock nut installation from the bottom of the die in situations where there aren't enough threads remaining on the top of the die.

We currently have 22 "Tips" files covering a variety of reloading and shooting topics. To see the complete library, click on the "TIPS" lightbulb!

Updated 03/29/20
To download in PDF format, just Click Here!

To request a printed copy, just call (855-507-0866 Toll Free) or
email ([email protected]) and we'll mail a printed copy to you.

Unfortunately, most May events that were on our list have been cancelled or postponed due to the COVID-19 pandemic. There are just the two below and the decision to hold them may get changed between now and then.