Packaging Equipment For Sale
Used & Unused Fillers, Labelers, Metal Detectors, Cappers, Wrappers, Shrink Tunnels, Conveyors & more
In Stock & Ready To Ship!

Top Load Case Packer, manufactured by J+P Maschinenbau, model KF350. Unit capable of filling up to twenty (20) 5-pound bags per minute and seventy (70) 2.5-pound bags per minute into cases. Includes 11' of empty carton conveyor extending from erector and 10' of filled carton conveyor to case sealer carton infeed. Complete with Allen Bradley PanelView Plus 600 touchscreen controls. Unit also includes skate wheel conveyor measuring 16" x 117". Driven by 3/60 Hz motor. Previously used in food operation and in very good condition.

Unused Thermo Fisher metal detector, model Apex 500. Aperture measures 10" x 10". Unit includes belt conveyor, plastic interlock belt measures 8" x 8'. Product speed rated for 1.7 ft/min to 3,300 ft/min. Multi-coil design, dual frequency, epoxy-lined aperture with stainless steel case, IP69K washdown.

Fortress Phantom metal detector, automatic, stainless steel construction, aperture measures 5-3/4" high X 14" wide. Equipped with 12" wide x 72" long flex link product conveyor, pneumatic retracting band system and touch pad controller with and visual display. Mounted on a stainless-steel frame with casters.

Stainless Steel Shrink Film Bundler, manufactured by Automation Packaging, Inc., type DURATech 2000. intermittent motion shrink film bundler capable of up to 100 round or rectangular bottles per minute depending on bottle size and pack pattern. Includes Overhead Hold-Down Kit, Solid "Hot Knife" seal bar with safeties and "On Demand" film feed assemblies. Previously used in pharmaceutical operation.

Bivans top flap closer for small cartons, tuck carton top closing cartoner, Model 82 Top Closer, includes three rows of chain driven conveyor with 3 long fingers set on 6" center-to-center spacing. Complete with top belt conveyor set up for 2" wide cartons, adjustable from 1 to 5 wide and up to 5 high. Last used to close small boxes with spices after space bags were placed inside. Rated for 5 to 60 cartons per minute. Good condition.

SIG Pack Vertical Form, Fill, and Seal Machine with 10-Head Combination Scale. Includes SIG Pack Type Phaser form, fill & seal machinery, Serial number 010322. Complete with 10-head multi-head weigher/combo scale with dimple buckets, model CS10, Serial number 002419. Buckets measure 5-1/2" X 8" x approximately 12" deep. Unit includes two (2) 1/3 HP, 208-230/460V, 3/60Hz motors on sealing section. System includes Chromalox digital controls. Previously filling 1 lb. to 5 lb. bags of gummy vitamins. Good condition.

High Tek 14-head combination weigh scale, Model HTMW-T2-2.5D-WD. Unit features sanitary stainless steel construction with fully enclosed radial feeders, dual opening hoppers 2.5 liter capacity with speeds up to 120 bottles per minute. Complete with photo eye infeed detection, full wash down series T2 with easy to remove and clean chutes and hardware. Serial number 1108036. Manufactured in 2015.

Vertek Model 750 form, fill and seal machine/bagger, manufactured by WeighPack, serial number 4217. Rated for up to 50 bags per minute. Maximum bag width of 7.50". Bagger is set up for gas flush (less air regulator), 1/4" round hole punch, tear notcher and hot stamp printer. Includes PLC color touch screen controls. Mounted on stainless steel frame with casters. New in 2015. Very good condition.

Ishida Combination scale with Ilapak form, fill & seal machine, model CCW-EM-214/30, 14-bucket with 4-3/4" x 5-1/2" x 8" deep buckets, smooth buckets, dimpled vibratory feeders. Scale feeds Ilapak Vegatronic vertical form, fill & seal machine, 11-3/4" wide sealing bar. Previously used to pack various candies into bags at a capacity of 45 bags/min. Scale and bagger are surrounded by mezzanine, safety rails and stairs.