(2) 8,500 Gallon Tanks, manufactured by A&B Process Systems, 304 stainless steel construction. Measures 10' diameter x 14'8" straight side. Dome top with 6" sloped bottom, 4" diameter side bottom outlet. Complete with top entering agitation, with 2-1/2" diameter shaft x 14'8" long and (2) sets of paddle blades, with 24" diameter swing. Agitator is driven by 2 HP, 1660 RPM, 60 Hz, 208/230/460V motor thru gearbox, ratio 37.77: 1, final output 44 RPM. Includes top 18" diameter and 34" diameter bottom manways, (2) top ports, (2) 4", (1) 4" top side, (1) 4" bottom side, (2) bottom side discharges (1) 4", (1) 2-1/2", new in 2008.

(2) 5,215 Gallon Tanks, stainless steel construction, measures approximately 102" diameter x 145" straight side. Vertical orientation with cone top and flat bottom, 3" diameter side bottom discharge, 3" bottom side inlet and bottom side manway with clamped cover; includes UV air filter with lights.

6,000 Gallon Tank, 316L stainless steel, UL 142 rated vessel. Measures 7-1/2' diameter X 18' straight side, cone top, flat bottom. Tank is insulated with 2" cal. magnesium silicate with aluminum cladding. Rated for <15 PSI design pressure, -10" WG design vacuum, 175 degrees Fahrenheit, -40 degrees Fahrenheit Includes 24" diameter flanged side bottom manway, 2" diameter side bottom outlet and 2" drain. Top openings - 6" center top opening for agitator, 8" vent and various 1" to 3" inlets.

(2) 1,500 Gallon Tanks, 316 Sanitary Stainless holding vessel manufactured by APV. Vessel is 6' diameter by 6'6" straight side internal, insulated and complete with cone bottom to 3" center bottom outlet, dished top with assorted top inlets and 18" diameter manway. Tank has stainless exterior and legs for wash down and sanitary use. Previously used in at a yogurt processing facility. Tank has level sensor and is in excellent condition.

10,000 Gallon Horizontal Ammonia Tank, pressure vessel, 304L stainless steel construction, rated for 50 PSI at 205 degrees Fahrenheit to minus 20 degrees Fahrenheit, measures 96" diameter X 26' straight side, 30-1/2' overall length, 0.375" shell thickness dished ends, mounted on saddles. ASME certified. Mounted on steel saddles. Manufactured by OHI Company, new in 2015.

(5) Ucon Dimple Jacketed Tanks, capacity 800 Liters/211 gallons, 42" diameter x 36", straight side, dome top, dish bottom, jacket maximum 1 bar at minus 20 to 120 degrees Celsius (minus 68 degrees to 248 degrees Fahrenheit), top fitting (1) 4", (2) 2", (1) 1", Tri-clamp, bottom side discharge 1", manufactured in 2008, portable on casters.

View Our Inventory