Vi30005W

5-Port,1G, IP67 PoE Powered, PoE Switch

5-port Layer 2 PoE powered PoE switch


100/1000Mbps network speeds, auto-sensing


IP 67 weatherproof/Waterproof


6Kv surge protection


Certified for IEC600068-2-52 for salt-laden environments


Can be powered from a remote PoE source to provide PoE power to all 4 ports


Up to 36W PoE per port, capable of combing each 2-ports for up to 72W


UPoE compliant input up to 72W


Automatic PoE port priority allocation


Over-current shutdown protection if the allocated PoE budget is exceeded


Certified (MPC™) high data rate for virtual loss-free transmission of cameras


Type tested to RFC 2544 TCP/IP network bandwidth packet transmission standards


Type tested for -40°C to +75°C operating temperature range


Complies with major IEEE standards and RFC network protocols for UTP, TCP/IP HTTP/HTTPS


Provides full Layer 2 network switch functionality


Vi3003WP

IP67 Weatherproof 1G Drop and Insert 3-Port 60W PoE Switch

IP67 Weatherproof protection to dust and up to 3 feet (1m) of water


IEC60068-252 certified for operation in salt-laden environments


Enables multiple camera connections on a single cable run


Each unit extends IP video and PoE for an extra 328 ft. (100m)


Can be cascaded to transmit IP video and PoE up to 3,000 ft (909m)


Powered by a single source PoE, no local power is required


Able to power IP PTZ domes


Complies with UPoE


Able to maintain up to 60W PoE at any point along the cable run


Automatically senses data transmission rate up to 1000Mbps (1Gbps)


Provides third port for drop and insert along a single cable run


Provides full IEEE network layer 2 switching to avoid transmission conflicts


No network configuration is required


Provides access to up to 9 IP addresses eliminating the need for network switches in small systems


Eliminates the need for multiple home-run cables runs for perimeter and parking lot applications


Hardened with a wide range operating temperature of -40°C to +75°C


Vi3002WP

Hardened Weatherproof Ethernet and 60W PoE Repeater

Extends Ethernet and 60W PoE range up to 656 ft. (200m)


PoE powered with no need for local power


Conforms to IP67 standards for total moisture and dust protection


IEC60068-252 certified for operation in salt-laden environments


Operates at a wide temperature range -40°C to +75°C


No network configuration required


Full network bandwidth 10/100Mbps for transmitting the highest megapixel cameras


Pass-Through-PoE up to 60W for high power PTZ cameras


The extremely compact size enables easy installation


Multiple Vi3002WPs can be used to extend IP video and PoE at distances up to 3000ft.


 

Vi2300WP

Weatherproof IP67 Ethernet Extender over UTP

Conforms to IP67 standards with total dust and moisture protection


IEC 60068-252 certified for operation in salt-laden environments


Easy to install and does not require connector removal


Requires no switch setting or network programming


Extended Pass-Through PoE (EPTP™) compatible with 802.3af, at, bt up to 74W


Mega-Pixel Certified (MPC™) High data rate, ideal for high bandwidth requirements of Mega-pixel cameras, multiple IP cameras systems, and cameras transmitting Jumbo Frames


Symmetric Bandwidth (SBW™) provides consistent upload and download with Virtual Zero Packet Loss (VZPL™)


Type tested to RFC-2544 TCP/IP network bandwidth packet transmission standards


Supports one-pair or four-pair UTP wires with built-in transceiver cable connectivity tester


Type tested for -40°C to +75°C conforming to NEMA-TS2 testing standards


Complies to major IEEE standards and RFC network protocols for UDP, TCP/IP, HTTP/HTTPS


Vi2400WP

Weatherproof Ethernet Extender over Coax

Transmits Ethernet and PoE up to 5,000 feet (1,515 m) over Coax cable


IP67 weatherproof construction for mounting on buildings and poles


Certified for IEC600068-2-52 for salt environments


Simply installation and lowers costs by eliminating the need for extra enclosures


Saves equipment costs and reduces installation time


Pass-Through PoE (PTP™) compatible with 802.3af and 802.3at PoE


MegaPixel Certified (MPC™) High data rate, ideal for high bandwidth requirements of Mega-pixel cameras and multiple IP cameras systems requiring Jumbo Frames


Symmetric Bandwidth(SBW™) provides consistent upload and download with Virtual Zero Packet Loss (VZPL™) over a total specified distance


Type tested to RFC-2544 TCP/IP network bandwidth packet transmission standards


Type tested for -40°C to +75°C temperature range


Complies to major IEEE standards and RFC network protocols for UDP, TCP/IP, HTTP/HTTPS


6KV surge protection


Complies to major IEEE standards and RFC network protocols for UDP, TCP/IP, HTTP/HTTPS


Vi00103W

Weatherproof Ethernet and PoE Multiplexer

Connects two IP/PoE devices to a PoE switch using a single Cat5/6 cable


Provides up to 37W to each of 2 remote devices


Weatherproof Camera side unit (TX module)


Reduces installation costs and time


Compatible with IEEE 802.3af and IEEE 802.3at


No power source required


Low cost and easy to use


Patented design