Is your
All in One Wine Pump
running slower?
Please check for leaking push button valve leaking vacuum at open port hole – when in use.
Click Here
Rebuild Your Pump – 35 dollars
For a Flat rate of
35.00 Dollars
we will:
·
Replace the ENTIRE vacuum portion of the pump (including side panels if needed)
·
Evaluate the following components*:
o
Electrical motor
o
Vacuum hoses
o
Vacuum release
·
Customer Responsible for shipping costs both ways
*
a nominal fee will apply to replace if needed, only with customer approval
Tips from Steve
1.
Plastic Milk Crates
a.
Set carboys inside to keep off the ground
b.
Easier to carry
c.
Set Carboys upside down for draining
d.
Drain bottles upside down
e.
Fill bottles safely and carry crate to corker
2.
Purchase an additional vacuum valve with hoses – this way you can have 2 complete setups (Bottling and Racking) without having to change any hoses or adapters.
Click Here
3.
Start with new sorbate and sulfite every spring to make sure it is always fresh – Due to limited shelf life
Please check out the following newer products
It is a simple and a cost effective way to eliminate harmful headspace in your carboy.
Stainless Steel bottle filler and Reservoir Kit
=
Click Here
Upgrade your deluxe pump with this added feature -
Comes with the precision vacuum valve already attached.
Allows you to
decrease or increase the liquid flow for bottling, eliminates any foaming from agitation. It is also great for use when filtering your wines.
We have reusable Carboy Tags. They are 2 sided –use a dry erase, permanent marker or a grease pen to keep your notes on.