It sounds like a tired Facebook post, but we wanted to do something light this month for everyone to enjoy. Normally our July newsletter would feature pictures of Hydra-Tech Pumps’ employees and their kids enjoying an Iron Pigs game at our annual summer picnic at the ballpark in Allentown. But this isn’t a normal year - not by a long shot. As many of you know the entire minor league baseball season was cancelled and with it our summer picnic at a game. So we decided to simply replace the pictures that would normally be here from the ball game with pictures of the kids enjoying summer. We hope that with all that is going on right now that you and your family are doing your best to enjoy the summer.

Happy Summer from our extended Hydra-Tech Family to yours.

Custom Systems – quick build and proving out a new unit design.
One of the things Hydra-Tech Pumps is known for is our customization – at our website and in our catalog are two long lists of options that are available for both hydraulic submersible dewatering pumps and hydraulic power units, from custom paint to custom design. As we have done before, we wanted to highlight another pair of customer designs.
A brand new prospect contacted us on April 23rd. He works in a pretty serious machine shop down south and was looking for an electric HPU to replace an existing (you might say antique) unit that was supporting a broaching machine. With some pictures of the existing unit in hand we had two maybe three phone calls to nail down the details and provided a quote to this prospect on 4/29, and after some additional changes, a revised quote on 5/1. An order was placed on 5/6 and after the 3-4 weeks to get some of the materials in including the JIC reservoir upon which the unit would be built, we designed, built and tested a one off, multi circuit, custom electric hydraulic power unit in 5 weeks. We would have turned it around in about half that time if not for a recalled electric motor that needed replaced by a supplier.
Speaking of completely custom, we were challenged by a valued, longtime customer to develop a brand new design based off of their very specific needs. In general terms we designed and built a 50 horsepower electric hydraulic power unit in a sound attenuated enclosure that will be used on ships all over the world performing salvage operations.
The customer asked us to perform some pretty significant heat testing. So once the unit was built and ready plans were made and a date for the test was set. On Wednesday July 8th, with personnel from both companies on hand at Hydra-Tech Pumps’ facility, we got started early in the morning with the testing. As the temperature out on the blacktop climbed up to close to 100 degrees we ran the unit for 3 hours under load and monitored oil and motor temperatures and performance.
In case this wasn’t enough, an ever tougher heat test was required by the customer. This unit could potentially be sitting on the deck of a ship at the equator with an ambient temperature of 115 – 120 degrees. To allow us to create this environment for the test, we had to build a temporary structure inside of our building that would allow us to place the unit inside and with the help of some heat lamps and a propane area heater, bring the temperature up to 120 degrees Fahrenheit and maintain that temperature for the duration of the test.
The power unit sat in the enclosure with the ambient temperature being monitored. The hydraulic hoses ran outside through a small hole in the wall of the enclosure, out a door and to a pump that was actually moving water against a simulated head in our outdoor test tank. This allowed the power unit to work as hard as it would in a real world scenario to really test the ability of the hydraulic oil cooler. Three hours later and with both tests successfully completed, the customer left our facility confident that the unit we built would be able to survive a worst case temperature scenario and continue to perform while the salvage divers in the water who rely on its hydraulic power could continue to operate their equipment.
At Hydra-Tech Pumps we are not afraid to go above and beyond for our customers. In some cases, that means a lot of time effort and work going into a one off unit that will likely never be built again. In other cases it means that we come up with a completely new design for a loyal customer that will perform under pressure. New designs always bring about a unique set of challenges. New designs aren’t easy – they tend to present new problems in the testing stages. But we see them through to the finish and deliver a system that satisfies a customer’s needs, even if it’s the only one we’ll ever build. Do you have a custom hydraulic power unit design need that no one else will consider? Give us a call and let’s see if we can do it – I bet we can!

Pump of the Month - S4CSL
Hydra-Tech’s S4CSL submersible 4” hydraulic driven sand slurry pump includes a built-in agitator used for stirring up solids.  This powerful material mover has hardened alloy wear parts and is designed to be used in applications where settled solids must be put into suspension and pumped away with the discharge water. Primary applications include de-silting ponds, lakes and streams; other uses include filling sand bags to prevent beach erosion, tank and digester cleaning or pumping sediment from caissons. The S4CSL requires hydraulic inputs of up to 15gpm@ 2500psi and when combined with our HT20 to HT35 open and sound attenuated power units, the S4CSL is capable of output flows to 620 gpm.  

Hydra-Tech Pumps | Nesquehoning, PA | PH: 570-645-3779 |