Wooden Hinge Tools and Accessories Specials
at Incremental Tools
MicroJig’s Magnetic Dust Cover closes the bevel slot on steel left-tilt cabinet saws, focusing dust collection airflow where it’s most effective. Trim to fit with scissors, removes instantly, and can be reversed when cutting bevels. 

Apply Coupon Code MJDC5 during checkout.
Nothing says “Craftsmanship” like adding matching wooden hinges to your projects! The HingeCrafter can be used in conjunction with any INCRA incrementally-positioned router fence system or the INCRA I-Box to produce unique hinges up to 10"-wide and with 3/8", 1/2", 5/8", or 3/4" barrel diameters. Includes an extra-long drill bit and full instructions. Now available for both inch-based and metric-based INCRA systems!  Made in USA.

Apply Coupon Code HC10 during checkout.
Make wooden hinges to finish off those special projects! The metric-edition HingeCrafter can be used in conjunction with any metric-based INCRA router fence positioner or the INCRA I-Box to produce unique hinges up to 250mm wide and with 9.5mm, 12.7mm, 15.9mm, or 19.0mm barrel diameters. Includes an extra-long drill bit and full instructions. Please note that the metric HingeCrafter is NOT compatible with imperial 1/32"-based INCRA systems, but it DOES work great with the I-Box. Made in USA. 

Apply Coupon Code HC10 during checkout.
Woodpeckers' unique Knuckle Clamps have pivoting, rubber-soled feet to protect your work & evenly distribute pressure, and the knuckles molded into the top of the clamps allow repositioning the pivot as the thickness of your material changes. These clamps are really fast for repetitive clamping work - the threaded shaft can be locked into position on the T-track, and the clamp springs open when the knob is loosened. They're compatible with INCRA & Woodpeckers T-Tracks and most tracks that use 1/4"-20 hardware. Made from reinforced polycarbonate, they're virtually indestructible. Made in USA!
Finally, an inexpensive digital unit that accurately displays fractions and can be retrofitted to a wide variety of router lifts, shapers, and other machines. The display simultaneously displays fractions & decimal inch with 1/1000” resolution and shows millimeters at the touch of a button. This unit works well on both the INCRA Mast-R-Lift II and the INCRA PRL-V2 router lifts. The remote display mounts easily wherever it works best with your setup. The sensor attaches to router lift by drilling two holes & includes self-threading screws. The 3ft. display cable quickly disconnects from the sensor. 
 
Apply Coupon Code WX5 during checkout.
In stock, only $44.95/pair
These sturdy clamps will quickly become indispensable when assembling everything from drawers to large cabinets. Unlike bar clamps, Woodpeckers Box Clamps keep your project parts perfectly aligned when dry fitting and provide complete access for driving screws or nails during final assembly. Great for all types of 90- degree joints, and the open-sided design allows using them at T-shaped joints like where shelves meet the sides of a case. Sold in pairs, but the biggest savings are in the 4-, 8-, and 12-clamp value packs. Made in USA. 
The 6” (150mm) standard rule set covers all your smaller projects, and their compact sizes make them easy to handle across a wide variety of layout work. These flexible steel rules feature a series of micro-fine guide holes and slots that perfectly accept a 0.5mm pencil to give you can't-miss accuracy and consistency that simply isn't possible with conventional "aim for the mark" rules or tape measures. Includes one each 6" (or 150mm) T-Rule, Bend Rule, Marking Rule, and a FREE 0.5mm mechanical pencil. Made in USA. 

Apply Coupon Code RS65 during checkout.

Coupons listed in this promotion may not be combined with other existing offers. Offers in this promotion valid only for orders placed between
April 18th and April 24th, 2023.