www.incrementaltools.com | Questions? Call 1-888-804-6272
Dovetail Bits, INCRA TS Router Tables &
More up to $35 Off
Better router bits make cleaner joints, and this 6-piece set covers a huge variety of box joints and dovetail joints with the two straight bits and the four most-frequently used dovetail bits. Top-notch Whiteside quality and performance. Carbide-tipped, 1/2" shank.

Apply Coupon Code WJS1 during checkout.
With the newly expanded lineup of metric INCRA fence systems comes the need for matching router bits for box joints and dovetails. This set of Whiteside bits is custom packaged just for INCRA, and it includes 6mm & 10mm straight bits plus a collection of four dovetail bits that are optimized for producing a broad range of dovetails on metric spacings.

Apply coupon code WJS1 during checkout.
The MatchFit Dovetail Router Bit is designed specifically for routing grooves for the Micro Jig MatchFit Dovetail Clamps and saves cleanup time compared to conventional dovetail bits (this bit cannot be used for dovetail joinery). Compared to a standard bit, its unique profile rounds over the sharp edges at the board’s surface, producing super clean dovetail grooves. The wider opening it leaves at the surface as it cuts also helps clear chips and sawdust for reduced friction & heat. Carbide tipped, 1/2” shank.
Save up to $30
Starting at $199.95
Put that space next to your saw to work! The left-side TS Router Tables easily attach to INCRA TS-LS and TS-III rail systems in place of the saw’s original extension wing to improve the accuracy of your routing work. By sliding the INCRA fence system down the rails for routing work, you have great access around the router, and you can work from the end of the saw facing the fence. All INCRA Router Tables include an aluminum INCRA MagnaLOCK Router Mounting Plate that is pre-drilled to fit most popular routers! Order the 28"x21" table for saws 27"-28" deep along the miter slot or order the 32"x21" table for saws 30"-31" deep. Not compatible with cabinet saws that have motor housings on the left side of the saw - check the Compatibility Chart for fitment details. Made in USA. 
Apply Coupon Code TSRT2L during checkout.
Adding to your INCRA TS platform? Our router table mounting hardware is guaranteed to save you tons of time. This is the same kit that's included with INCRA TS Router Tables: heavy steel brackets will hang any panel up to 1-3/8" thick from the T-slots on the inner face of the TS rails, and two steel stiffeners reinforce your table from beneath. All hardware included. Made in USA. 

Apply Coupon Code TSRTHW7 during checkout.
Save up to $35
Starting at $224.95
Take advantage of your INCRA rip fence's versatility! The right-side TS Router Tables easily attach to INCRA TS-LS and TS-III rail systems to get double duty from your INCRA positioner. The right-side tables allow switching to routing functions without shifting the TS system's base assembly on the rails. All INCRA Router Tables include an aluminum INCRA MagnaLOCK Router Mounting Plate that is pre-drilled to fit most popular routers!  Order the 28"x32" table for saws that measure 27"-28" deep along the miter slot or order the 32"x32" table for saws 30"-31" deep. Not compatible with cabinet saws that have motor housings on the right side of the saw when used with 72" INCRA rail sets - check the Compatibility Chart for fitment details. TS Rail Support Legs highly recommended. Made in USA. 
Apply Coupon Code TSRT2R during checkout.
Pocket-sized with big features, this might become your most-used INCRA Rule! T-Rules are the best choice for marking points off the edges of boards or drawing lines parallel to edges. Plus, the Tiny-T is our only T-Rule with slots up the end of the blade for setting your saw blade or router bit heights with exceptional precision – just slide the red stop bar flush with the bottom edge of the blade, stand it upright on your table, and view the cutter through the slots. INCRA's patented marking holes perfectly accept fine 0.5mm mechanical pencils at every 1/16th, 32nd, and 64th from 0 to 3 inches, right in the range where much layout work happens. Made in USA. 
Apply Coupon Code TTRU3 during checkout.
New Metric Version!
Only $11.95
Perfect for marking points off the edges of boards or drawing lines parallel to edges, the NEW pocket-sized Metric Tiny-T Rule measures only 75mm x 115mm. INCRA's patented marking holes and slots accurately guide your 0.5mm mechanical pencil to spacings of 1mm, 0.5mm, and 0.25mm on a scale reading 0 – 75mm with zero parallax courtesy of the razor thin blade. You can’t miss, so your layout work is completely repeatable day to day. A scale with slots up the end of the blade lets you set your saw blade or router bit heights with exceptional precision – just slide the red stop bar flush with the bottom edge of the blade, stand it upright on your table, and view the cutter through the slots. Made in USA. 
Apply Coupon Code TTRU3 during checkout.

Coupons listed in this promotion may not be combined with other existing offers. Offers in this promotion valid only for orders placed between
February 14th and February 20th 2023.