Issue 42

April 9, 2026

Time to Read: 5 minutes


-Hot Take-

If your partnership is just sending POs back and forth, you have a vendor, not an ally.

Joke of the Week

Q: What do you call a machinist who has never broken an end mill?

A: A liar.

Ask a CAM Pro

Real shop problems. Answers from people who have been there.

What's the most efficient way to program 5-axis parts?


Efficient 5-axis programming is about finishing the part with fewer setups and fewer surprises. The goal is clean, predictable motion that proves out fast and runs without babysitting. The fastest 5-axis job is the one that runs right the first time.


Start with orientations, not toolpaths.

Pick two or three strong part positions that give you access to most features. Chasing every surface with constant motion usually adds risk and time instead of saving it.


Use 3+2 whenever it gets the job done.

Position-and-cut is often faster to program, easier to verify, and more stable on the machine. Save full simultaneous 5-axis for true undercuts, complex blends, and continuous surface requirements.


Keep tools short and assemblies consistent.

Short stickout increases rigidity, improves finish, and lets you hold feed without chatter. Model the full tool and holder stack so what you verify matches what you run.


Control tool axis behavior.

Limit tilt and rotation so the tool doesn’t hunt for angles or flip unexpectedly. Smooth, intentional tool axis control reduces unnecessary motion and keeps cycle time predictable.


Verify early with real fixtures and machine limits.

Simulate with your fixtures, clamps, and tool assemblies in place. Catch axis limits, clearance issues, and retract problems while it’s still easy to change strategy.


Use accurate stock to avoid air cutting.

Carry stock forward between operations and use rest machining so your tools only cut where material exists. Bad stock equals wasted time and ugly surprises.


Sequence for stability and finish.

Rough and semi-finish in the most rigid orientations first, then finish with consistent stock left on the walls. Save thin features and delicate surfaces for last.


Bottom line:

Efficiency in 5-axis comes from smart orientations, controlled tool axis motion, and verification you can trust. Use simultaneous motion only when it earns its keep, and everything gets faster.


Have a programming question?


Send it in for the next edition of Ask a CAM Pro!

Weekly Poll

Choose from the answers below.

(Keep scrolling to see last week's poll results.)

What's the biggest lie shops tell themselves?

View the results of last week's poll HERE.

From the Floor

Fifty Percent Efficient, One Hundred Percent Annoyed


"There was a period when the ERP system at work spit out numbers showing I was only running at fifty percent efficiency. My supervisor took that number as gospel and threw it back at me: 'You’re only giving me half effort.'


Let me tell you, nothing crushes your shop spirit faster than someone weighing your work against an algorithm that doesn’t know the difference between hustle and reality. I was buried in paperwork, juggling setups, trying to help others, and still felt accused of laziness because a computer couldn’t see me dodging problems all day."


– Machinist

Video of the Week (Powered by GibbsCAM)

Foundations of Intermediate Tooling: Video 1

Learn the foundations of intermediate tooling in GibbsCAM so you can understand how tool blocks, fixtures, and machine structure work together to create accurate, repeatable setups.

CAMedy Central

Industry Intel

UW-Stout Gets $19 million Federal Grant To Manage Statewide Manufacturing Program - UW-Stout received $19 million in federal funding, $3.8 million annually for five years, to lead Wisconsin’s Manufacturing Extension Partnership and help strengthen small and mid-sized manufacturers statewide.



Humans and Machines: Solving the Factory Skills Crisis - Manufacturers will not solve the skills crisis with automation alone, because the biggest gains will come from pairing new technology with aggressive worker upskilling, clearer AI communication, and talent development built into the operational strategy from the start.


Uncertainty Reigns For Manufacturers Seeking Tariff Refunds - Manufacturers are scrambling to decide whether to sue, file administrative claims, or wait for Customs’ new refund portal after the Supreme Court struck down many Trump-era emergency tariffs, because the refund process remains unclear and potentially burdensome.

Industry Growth (Open Jobs)

A few hot openings across the industry this week:



CNC Swiss Machinist (1st Shift) - Nycor Technical - Maple Grove, MN


CNC Mill Machinist II (1st & 2nd Shift) - P&F Machining - Otsego, MN


Robot Programmer - Acieta, LLC - Council Bluffs, IA


CNC Machinist IV (Swiss Turning) - Rapid Precision Manufacturing, Inc. - Britton, SD


Machinist - Malloy Electric - Mandan, ND


CNC Programmer - Belcan - York, NE



Tsugami Swiss CNC Programmer/Operator - Quality Screw Machine Products, Inc. - St. Louis, MO



Machining Supervisor - Magnum Systems, Inc. - Parsons, KS

Trade Show & Event Radar

Date

Show

Location

April 13-16

Machining Summit on the Summit

Mammoth Lakes, CA

April 13-16

Modex26

Atlanta, GA

April 22-23, 2026

MD&M South

Charlotte, NC

May 5-6

Morris & Tsugami America Open House

Brooklyn Park, MN

May 6-7

TechDays 2026

Mebane, NC

June 22-25

Automate

Chicago, IL

July 29-30

Advanced Manufacturing Expo

Grand Rapids, MI

Sept 14-19, 2026

IMTS

Chicago, IL

November 11-13

Titans of CNC Boombastic Show

Flower Mound, TX

Did someone forward you this newsletter?

Subscribe to get your own copy every week.